PrepKiYour AI companion for entrance exam preparation
JEE PHYSICS NOTES

Stress and strain

JEE · Physics · Mechanical Properties of Solids · Std XI

Summary

Elasticity is the property of a body to regain its original size and shape when the deforming force is removed. The body is perfectly elastic if it returns completely (quartz and phosphor bronze are nearly perfect). Plasticity is the opposite: a body that does not regain its shape (putty, wet clay). Beyond the elastic limit a wire is left with a permanent set when the load is removed.

Stress is the restoring force per unit area, σ = F/A (unit Pa). Strain is the fractional change (no unit). Three kinds: longitudinal (change in length), shearing (change in shape, an angle) and volumetric (change in volume under equal pressure). Poisson's ratio is the ratio of lateral to longitudinal strain.

Key formulas

Longitudinal stress, strain
σ = F/A, ε = ΔL/L
Shear stress, strain
τ = F/A (tangential), φ = Δx/L (angle)
Volumetric stress, strain
ΔP, −ΔV/V
Poisson's ratio
σ_P = lateral strain/longitudinal strain (−0.1 to 0.5)
Volume change on stretching
ΔV/V = ε(1 − 2σ_P)
Wire hanging under own weight w, load W
stress at distance x from the top = (W + w(L − x)/L)/A
Young's modulus
Y = slope of the straight part of the stress–strain graph
Energy per unit volume
u = ½ × stress × strain = σ²/2Y = ½Yε²
Energy in a wire
U = ½ F ΔL = ½ (σ²/Y) × (volume)
Area under the curve
energy absorbed per unit volume

What this note covers

  • Elasticity and plasticity
  • Longitudinal, shearing and volumetric stress and strain
  • Stress-strain curve
  • Hooke's law

Solved past-paper question (JEE 2020)

A body of mass m=10 kg is attached to one end of a wire of length 0.3 m. The maximum angular speed (in rad s⁻¹) with which it can be rotated about its other end in space station is (Breaking stress of wire =4.8×10⁷ N m⁻² and area of cross-section of the wire =10⁻² cm²) is :

Solution

  1. In a space station there is no weight on the body, so only the tension in the wire supplies the centripetal force. The wire is about to break when the stress reaches the breaking stress.

  2. Convert the area: 10⁻² cm² = 10⁻⁶ m². Maximum tension.

    T_max = (breaking stress) × A = 4.8 × 10⁷ × 10⁻⁶ = 48 N

  3. Centripetal force at the maximum angular speed.

    T_max = m ω² r ⟹ 48 = 10 × ω² × 0.3

  4. Solve (numerical answer).

    ω² = 16 ⟹ ω = 4 rad/s

Answer: 4

Common mistake: Using the area in cm² without converting, or forgetting that the tension is the centripetal force.

The full note has 10 solved questions, 10 practice questions, figures and a topic test. Reading it on PrepKi is free after you log in.

PDF download is included in PrepKi plans. See plans.

More notes in Mechanical Properties of Solids