Summary
When a wire is stretched within the elastic limit, the work done is stored as elastic potential energy. The work is the area under the force–extension graph. In terms of stress σ and strain ε, the energy stored per unit volume is the area under the stress–strain graph.
A rod that is free to expand grows by ΔL = αLΔT and has no stress. If its ends are held rigidly, the expansion is prevented, so the walls push back. The rod develops a compressive stress on heating (tensile on cooling). The stress is the stress that would stretch or compress the rod by the thermal change, with strain αΔT.
Key formulas
- Energy per unit volume
- u = ½σε = σ²/(2Y) = ½Yε²
- Energy stored in a wire
- U = ½ F x = ½ (YA/L) x²
- Thermal strain, stress, force
- ε = αΔT, σ = YαΔT, F = AYαΔT
- Torque to twist a cylinder
- τ = πηr⁴θ / (2L)
- Hollow cylinder
- τ = πη(r₂⁴ − r₁⁴)θ / (2L)
- Depression of a beam
- δ = W l³ / (4 b d³ Y)
What this note covers
- Elastic potential energy of a stretched wire
- Thermal stress
- Torsion of a cylinder
- Bending of beams
Solved past-paper question (JEE 2020)
Two steel wires having same length are suspended from a ceiling under the same load. If the ratio of their energy stored per unit volume is 1 : 4, the ratio of their diameters is:
- (A) 1:\sqrt2
- (B) 1:2
- (C) \sqrt2:1
- (D) 2:1
Solution
Energy per unit volume is u = σ²/(2Y). The wires are both steel, so Y is the same.
u ∝ σ²
The load is the same, so stress depends on the area, which depends on the diameter squared.
σ = F/(πd²/4) ∝ 1/d², so u ∝ 1/d⁴
Put in the given ratio of energies.
u₁/u₂ = (d₂/d₁)⁴ = 1/4, so d₂/d₁ = 1/√2
Therefore d₁ : d₂ = √2 : 1.
Answer: (C) \sqrt2:1
Common mistake: Using the energy ratio as the ratio of d² instead of d⁴. Stress itself depends on d².
The full note has 8 solved questions, 8 practice questions, figures and a topic test. Reading it on PrepKi is free after you log in.
PDF download is included in PrepKi plans. See plans.