PrepKiYour AI companion for entrance exam preparation
JEE PHYSICS NOTES

Elastic moduli

JEE · Physics · Mechanical Properties of Solids · Std XI

Summary

Within the elastic limit, stress is proportional to strain (Hooke's law). For a wire pulled by a force F, the tensile stress is F/A and the strain is ΔL/L. Young's modulus is Y = (F/A)/(ΔL/L) = FL/(AΔL), measured in N/m² (pascal). It depends on the material only, not on the length or the radius of the wire.

When a uniform pressure change ΔP acts on a body from all sides, its volume changes by ΔV. The bulk modulus is B = −ΔP/(ΔV/V) = −VΔP/ΔV. The minus sign shows that the volume decreases when the pressure increases. Compressibility is 1/B. Solids and liquids have a large B, and gases a small one (for a gas at pressure P: B = P…

Key formulas

Young's modulus
Y = (F/A)/(ΔL/L) = FL/(AΔL)
Extension of a wire
ΔL = FL/(AY) = 4FL/(πd²Y)
Force constant of a wire
k = YA/L
Bulk modulus
B = −VΔP/ΔV
Compressibility
1/B
Cube under pressure
ΔV/V = 3ΔL/L
Shear modulus
η = F/(Aθ) = Fh/(Ax)
Poisson's ratio
σ = lateral strain/longitudinal strain
Volume change when stretched
ΔV/V = (ΔL/L)(1 − 2σ)
Relations
Y = 3K(1 − 2σ) = 2η(1 + σ), 9/Y = 1/K + 3/η

What this note covers

  • Young's modulus
  • Bulk modulus and compressibility
  • Shear modulus (modulus of rigidity)
  • Poisson's ratio

Solved past-paper question (JEE 2021)

The length of metallic wire is l₁ when tension in it is T₁. It is l₂ when the tension is T₂. The original length of the wire will be:

  1. (A) (l₁+l₂)/2
  2. (B) (T₂l₁+T₁l₂)/(T₁+T₂)
  3. (C) (T₁l₁-T₂l₂)/(T₂-T₁)
  4. (D) (T₂l₁-T₁l₂)/(T₂-T₁)

Solution

  1. Let the original length be l₀. The extension is proportional to the tension: Δl = T l₀/(AY).

    l₁ − l₀ = T₁ l₀/(AY), l₂ − l₀ = T₂ l₀/(AY)

  2. Divide the two equations to remove A and Y.

    (l₁ − l₀)/(l₂ − l₀) = T₁/T₂

  3. Cross-multiply and collect l₀.

    T₂ l₁ − T₂ l₀ = T₁ l₂ − T₁ l₀, l₀ (T₁ − T₂) = T₁ l₂ − T₂ l₁

  4. Solve.

    l₀ = (T₂ l₁ − T₁ l₂)/(T₂ − T₁)

Answer: (D) (T₂l₁-T₁l₂)/(T₂-T₁)

Common mistake: Taking the average of l₁ and l₂: the extension is proportional to the tension, so the original length comes from the two equations together.

The full note has 8 solved questions, 8 practice questions, figures and a topic test. Reading it on PrepKi is free after you log in.

PDF download is included in PrepKi plans. See plans.

More notes in Mechanical Properties of Solids