Summary
The metre bridge is a Wheatstone bridge in which the two ratio arms are the two parts of a uniform 100 cm wire. A known resistance R is in one gap and the unknown resistance X in the other. The jockey is moved on the wire until the galvanometer shows no deflection (the null point).
Resistivity ρ is a property of the material, while resistance R = ρ L / A depends on the shape too. In the experiment, the metre bridge gives R of a wire of length L; a screw gauge gives the diameter d, so A = π d² / 4.
Key formulas
- Metre bridge balance
- X / R = l / (100 − l)
- Unknown resistance
- X = R l / (100 − l)
- Resistivity from R, L, d
- ρ = π d² R / (4 L)
- Resistivity from graph
- ρ = slope of R–L graph × A
- Percentage error in X / R
- Δl / l + Δl / (100 − l)
- Stretching a wire
- R′ = n² R for length × n; ρ unchanged
What this note covers
- Unknown resistance by metre bridge
- Resistivity of a wire
- Sources of error
Solved past-paper question (NEET 2020)
A resistance wire connected in the left gap of a metre bridge balances a 10 Ω resistance in the right gap at a point which divides the bridge wire in the ratio 3 : 2. If the length of the resistance wire is 1.5 m, then the length of 1 Ω of the resistance wire is:
- (A) 1.0 × 10⁻¹ m
- (B) 1.5 × 10⁻¹ m
- (C) 1.5 × 10⁻² m
- (D) 1.0 × 10⁻² m
Solution
The balance point divides the wire in the ratio 3 : 2, so the left length is 60 cm and the right length is 40 cm. The unknown wire is in the left gap.
l / (100 − l) = 3/2
Apply the bridge condition with the 10 Ω resistance.
X / 10 = 3/2
So the resistance of the wire is 15 Ω.
X = 15 Ω
The wire of length 1.5 m has 15 Ω, so 1 Ω needs (1.5 / 15) m.
length of 1 Ω = 1.5 / 15 = 0.1 m = 1.0 × 10⁻¹ m
Answer: (A) 1.0 × 10⁻¹ m
Common mistake: Using the ratio 3 : 2 the wrong way round and getting 6.7 Ω.
The full note has 6 solved questions, 6 practice questions, figures and a topic test. Reading it on PrepKi is free after you log in.
PDF download is included in PrepKi plans. See plans.