Summary
The emf (E) of a cell is the work done by the cell per unit charge to carry it round the whole circuit. It is the potential difference between the terminals when no current flows (open circuit). When current I is drawn, a part Ir is lost inside the cell, and the terminal voltage V is smaller than E.
The electrolyte and plates of a cell oppose current. This opposition is the internal resistance r, in series with the emf. Since V = E − Ir, a V–I graph of a cell is a straight line with the V-axis intercept E and slope −r. On short circuit (R = 0) the current is the largest, I = E/r.
Key formulas
- Discharging (current leaves the + terminal)
- V = E − Ir
- Charging (current enters the + terminal)
- V = E + Ir
- Open circuit (I = 0)
- V = E
- Current in the circuit
- I = E/(R + r)
- From the graph
- r = E / I(short) = −slope
- From two readings
- E = I₁(R₁ + r) = I₂(R₂ + r)
- Short-circuit current
- I = E/r
- Internal resistance by voltmeter
- r = R (E − V)/V
- Series, aiding
- I = nE/(R + nr)
- Parallel, identical cells
- I = E/(R + r/m)
What this note covers
- Emf and terminal voltage
- Internal resistance
- Cells in series and parallel
Solved past-paper question (NEET 2026)
A resistor is connected to a battery of 12 V emf and internal resistance 2 Ω. If the current in the circuit is 0.6 A, the terminal voltage of the battery is:
- (A) 10 V
- (B) 10.8 V
- (C) 12 V
- (D) 1.2 V
Solution
The battery is discharging into the resistor, so some voltage is lost inside it.
Voltage lost across the internal resistance.
Ir = 0.6 × 2 = 1.2 V
Terminal voltage = emf minus the drop.
V = E − Ir = 12 − 1.2 = 10.8 V
Option D (1.2 V) is only the internal drop, not the terminal voltage.
Answer: (B) 10.8 V
Common mistake: Writing V = E + Ir, or taking the terminal voltage as the emf (12 V).
The full note has 6 solved questions, 6 practice questions, figures and a topic test. Reading it on PrepKi is free after you log in.
PDF download is included in PrepKi plans. See plans.