Summary
When charge flows through a resistor, the electrons keep colliding with the ions and the electrical energy turns into heat. This is Joule heating: H = I²Rt = VIt = (V²/R)t joules. Which form to use depends on what stays the same: in series the current is common (use I²R), in parallel the voltage is common (use V²/R).
Power is the rate of energy transfer: P = VI = I²R = V²/R (watt). An appliance rated 'P watt, V volt' has a fixed resistance R = V²/P. If it is run at another voltage V′ (and its resistance is taken as constant), the power becomes P′ = V′²/R = P(V′/V)². Commercial energy is measured in kilowatt-hour: 1 kWh = 3.6…
Key formulas
- Power
- P = VI = I²R = V²/R
- Resistance from the rating
- R = V²/P (rated values)
- Power at a different voltage
- P′ = P (V′/V)²
- Energy used
- E = P × t (kWh = kW × hours)
- Bill
- Cost = number of units (kWh) × rate per unit (₹)
- Same resistors, series : parallel
- P_series : P_parallel = R₁R₂ : (R₁ + R₂)² (for the same supply)
- Power in R
- P = E²R/(R + r)²
- Condition for maximum power
- R = r
- Maximum power
- P_max = E²/4r
- Efficiency
- η = R/(R + r) (50% at maximum power)
What this note covers
- Joule heating
- Electric power
- Maximum power transfer
Solved past-paper question (NEET 2022)
Two resistors of resistance, 100 Ω and 200 Ω are connected in parallel in an electrical circuit. The ratio of the thermal energy developed in 100 Ω to that in 200 Ω in a given time is:
- (A) 1 : 4
- (B) 4 : 1
- (C) 1 : 2
- (D) 2 : 1
Solution
In parallel both resistors have the same voltage V, so use H = V²t/R.
H ∝ 1/R (same V and t)
Write the ratio of the heat in 100 Ω to that in 200 Ω.
H₁/H₂ = R₂/R₁ = 200/100
The smaller resistance gets more heat in parallel.
H₁ : H₂ = 2 : 1
Answer: (D) 2 : 1
Common mistake: Using H = I²Rt and thinking the larger resistor gets more heat. In parallel the voltage is common.
The full note has 8 solved questions, 8 practice questions, figures and a topic test. Reading it on PrepKi is free after you log in.
PDF download is included in PrepKi plans. See plans.