Summary
Electric current is the rate of flow of charge across a cross-section: I = dq/dt. For a steady current I = q/t. The SI unit is the ampere (1 A = 1 C s⁻¹). Current is a scalar, even though it has a direction in a wire; it obeys ordinary addition, not the vector law.
Free electrons move randomly at about 10⁶ m s⁻¹ and collide with the lattice ions. An electric field E gives each electron an acceleration a = eE/m between collisions. Averaging over the time τ between collisions (the relaxation time) gives a small steady drift velocity opposite to E.
Key formulas
- Drift speed
- v_d = eEτ / m
- Current in a wire
- I = n e A v_d
- Current density
- J = n e v_d = (n e² τ / m) E
- Mobility
- μ = v_d / E = eτ / m (unit m² V⁻¹ s⁻¹)
- Resistivity
- ρ = m / (n e² τ) = 1 / (n e μ)
- Current
- I = dq/dt; N = I t / e
- Current density
- J = I / A
- Drift speed
- v_d = eEτ / m = I / (n e A)
- Mobility
- μ = v_d / E = eτ / m
- Resistivity
- ρ = m / (n e² τ) = 1 / (n e μ)
What this note covers
- Electric current
- Drift velocity and mobility
- Ohm's law and V-I characteristics
- Limitations of Ohm's law
Solved past-paper question (NEET 2022)
A copper wire of length 10 m and radius (10⁻²/√π) m has electrical resistance of 10 Ω. The current density in the wire for an electric field strength of 10 (V/m) is:
- (A) 10⁻⁵ A/m²
- (B) 10⁵ A/m²
- (C) 10⁴ A/m²
- (D) 10⁶ A/m²
Solution
Find the cross-section: A = π r² with r² = 10⁻⁴/π.
A = π × 10⁻⁴/π = 10⁻⁴ m²
Use R = ρL/A to get the resistivity.
ρ = R A / L = 10 × 10⁻⁴ / 10 = 10⁻⁴ Ω m
Current density is J = σE = E/ρ.
J = 10 / 10⁻⁴ = 10⁵ A m⁻²
Answer: (B) 10⁵ A/m²
Common mistake: Using the length as the area, or forgetting that the radius is given as 10⁻²/√π, which makes the area exactly 10⁻⁴ m².
The full note has 8 solved questions, 8 practice questions, figures and a topic test. Reading it on PrepKi is free after you log in.
PDF download is included in PrepKi plans. See plans.