PrepKiYour AI companion for entrance exam preparation
MHT-CET PHYSICS NOTES

Power in AC Circuits

MHT-CET · Physics · AC Circuits · Std XII

Summary

In an AC circuit the instantaneous power is p = v i. For v = V₀ sin ωt and i = I₀ sin(ωt − φ), the product contains a steady part and a part that oscillates at 2f. Averaged over a full cycle, only the steady part survives:

Average (true or real) power P = Vrms Irms cos φ = ½ V₀I₀ cos φ, measured in watt. The product Vrms Irms is the apparent power S, in volt-ampere (VA). The power factor is cos φ = P/S = R/Z. It lies between 0 and 1, and the power loss in the circuit is always P = Irms² R, since only the resistor dissipates energy.

Key formulas

Average (true) power
P = Vrms Irms cos φ = ½V₀I₀ cos φ
Power factor
cos φ = R/Z = P/S
Power loss in the circuit
P = Irms² R
Apparent power
S = Vrms Irms (VA)
Reactive power
Q = Vrms Irms sin φ (VAR); S² = P² + Q²
Useful (watt-ful) current
I cos φ
Wattless current
I sin φ = I X/Z
Pure R
cos φ = 1; P = Vrms Irms
Pure L or C
cos φ = 0; P = 0
At resonance
cos φ = 1; P = Vrms²/R

What this note covers

  • Average power and power factor
  • Wattless current

Solved past-paper question (MHT-CET 2025)

A series L-C-R circuit is connected to an AC source of 230 V, 50 Hz. The circuit contains a resistance of 80 ohm, an inductor of reactance 70 ohm and a capacitor of reactance 130 ohm. The power factor of the circuit is x. The value of x is

  1. (A) 0.4
  2. (B) 0.8
  3. (C) 0.6
  4. (D) 0.9

Solution

  1. Net reactance is the difference of the two reactances.

    X = XC − XL = 130 − 70 = 60 Ω

  2. Find the impedance.

    Z = √(80² + 60²) = √10000 = 100 Ω

  3. The power factor is R/Z.

    cos φ = 80/100 = 0.8

Answer: (B) 0.8

Common mistake: Using XL + XC = 200 Ω, or writing the power factor as X/Z = 0.6.

The full note has 7 solved questions, 7 practice questions, figures and a topic test. Reading it on PrepKi is free after you log in.

PDF download is included in PrepKi plans. See plans.

More notes in AC Circuits