Summary
In a series LCR circuit the same current flows through R, L and C, but the voltages across them are not in phase. VR is in phase with I, VL leads I by 90° and VC lags I by 90°, so VL and VC point in opposite directions. The applied voltage is their phasor sum.
Dividing the voltages by I gives the impedance Z = √(R² + (XL − XC)²), the total opposition of the circuit, in ohm. The current is Irms = Vrms/Z and the phase angle φ between voltage and current is given by tan φ = (XL − XC)/R. Here XL = 2πfL and XC = 1/(2πfC).
Key formulas
- Impedance
- Z = √(R² + (XL − XC)²)
- Phase angle
- tan φ = (XL − XC)/R; cos φ = R/Z
- Current
- Irms = Vrms/Z
- Voltages
- V = √(VR² + (VL − VC)²)
- LR and RC circuits
- Z = √(R² + XL²); Z = √(R² + XC²)
- Resonant frequency
- ω₀ = 1/√(LC); f₀ = 1/(2π√LC)
- At resonance
- XL = XC, Z = R, Imax = V/R, φ = 0
- Quality factor
- Q = ω₀L/R = 1/(ω₀CR) = (1/R)√(L/C)
- Bandwidth
- Δω = R/L; Δf = f₂ − f₁; Q = f₀/Δf
What this note covers
- Impedance and phase angle
- Resonance and sharpness (Q-factor)
Solved past-paper question (MHT-CET 2019)
In a series L-C-R circuit, R = 300 ohm, L = 0.9 H, C = 2 microfarad and omega = 1000 rad/s. The impedance of the circuit is
- (A) 500 ohm
- (B) 1300 ohm
- (C) 400 ohm
- (D) 900 ohm
Solution
Find the inductive reactance.
XL = ωL = 1000 × 0.9 = 900 Ω
Find the capacitive reactance (C = 2 μF = 2 × 10⁻⁶ F).
XC = 1/(ωC) = 1/(1000 × 2 × 10⁻⁶) = 500 Ω
Combine in the impedance formula.
Z = √(300² + (900 − 500)²) = √(90000 + 160000)
Take the square root.
Z = √250000 = 500 Ω
Answer: (A) 500 ohm
Common mistake: Adding all three: 300 + 900 + 500 = 1700, or R + XL − XC = 700. The resistance and reactance combine as a right-angled triangle.
The full note has 9 solved questions, 9 practice questions, figures and a topic test. Reading it on PrepKi is free after you log in.
PDF download is included in PrepKi plans. See plans.