PrepKiYour AI companion for entrance exam preparation
MHT-CET PHYSICS NOTES

AC Basics: Values and Phasors

MHT-CET · Physics · AC Circuits · Std XII

Summary

An alternating emf or current changes its magnitude and direction periodically. For a sinusoidal AC, the instantaneous values are e = e₀ sin ωt and i = i₀ sin ωt, where e₀, i₀ are the peak (maximum) values, ω = 2πf = 2π/T is the angular frequency, f is the frequency and T the time period. In India the supply has f = 50 Hz, so T = 0.02 s.

The rms value is the steady DC current that produces the same heat in a resistor in the same time as the AC does. That is why the heating effect uses Irms² R t. A 230 V mains supply is the rms value; its peak is 230√2 ≈ 325 V.

Key formulas

Angular frequency
ω = 2πf = 2π/T
Instantaneous values
e = e₀ sin ωt; i = i₀ sin(ωt ± φ)
rms value
Irms = I₀/√2 = 0.707 I₀; Erms = E₀/√2
Mean over half cycle
I_mean = 2I₀/π = 0.637 I₀
Mean over full cycle
0
Time for a given angle
t = θ/ω = (θ/2π) T
Phase to time
Δt = φ/ω = φT/2π
Heat produced
H = Irms² R t

What this note covers

  • Instantaneous, peak, mean and rms values
  • Phasors

Solved past-paper question (MHT-CET 2025)

The instantaneous value of current in an AC circuit is I = 3 sin(50 pi t + pi/4) A. The current will be maximum for the first time at

  1. (A) 1/50 s
  2. (B) 1/100 s
  3. (C) 1/200 s
  4. (D) 1/600 s

Solution

  1. The current is maximum when the sine term equals 1, that is when the whole angle is π/2.

    50πt + π/4 = π/2

  2. Subtract the phase constant from both sides.

    50πt = π/2 − π/4 = π/4

  3. Divide by 50π to get the first time the maximum occurs.

    t = (π/4) ÷ (50π) = 1/200 s

Answer: (C) 1/200 s

Common mistake: Setting 50πt = π/2 and ignoring the phase constant π/4. That gives 1/100 s, which is wrong.

The full note has 6 solved questions, 6 practice questions, figures and a topic test. Reading it on PrepKi is free after you log in.

PDF download is included in PrepKi plans. See plans.

More notes in AC Circuits