Summary
The vernier callipers has a main scale and a sliding vernier scale. The least count (LC), or vernier constant, is the smallest length it can measure: the difference between one main scale division (MSD) and one vernier scale division (VSD). The vernier scale is made so that N VSD cover (N − 1) MSD, which makes it more precise than the main scale alone.
Zero error is the reading when the jaws are closed. If the vernier zero is to the right of the main zero, the error is positive and must be subtracted. If it is to the left, the error is negative and must be added (subtract a negative number).
Key formulas
- Least count
- LC = 1 MSD − 1 VSD
- LC when N VSD = (N − 1) MSD
- LC = 1 MSD / N
- Reading
- MSR + n × LC
- Positive zero error
- ZE = + n × LC
- Negative zero error
- ZE = −(N − n) × LC
- True reading
- Observed reading − ZE
- Cylinder volume
- V = πd²L/4
- Sphere volume
- V = πd³/6
- Error in cylinder volume
- ΔV/V = 2Δd/d + ΔL/L
- Error in sphere volume
- ΔV/V = 3Δd/d
What this note covers
- Least count and zero error
- Measuring a length, diameter or depth
- Volume of a cylinder or sphere
Solved past-paper question (NEET 2026)
In a vernier callipers, 20 VSD coincide with 16 MSD (each division of length 1 mm). The least count of the vernier callipers is:
- (A) 0.01 cm
- (B) 0.1 cm
- (C) 0.02 cm
- (D) 0.2 cm
Solution
Find the length of one vernier division from the given relation.
20 VSD = 16 MSD, with 1 MSD = 1 mm.
1 VSD = 16/20 = 0.8 mm
Least count is the difference between one MSD and one VSD.
LC = 1 − 0.8 = 0.2 mm
Convert to centimetres.
LC = 0.02 cm
Answer: (C) 0.02 cm
Common mistake: Using LC = 1 MSD/20 = 0.05 mm. That formula holds only when 20 VSD = 19 MSD, not 16.
The full note has 5 solved questions, 5 practice questions, figures and a topic test. Reading it on PrepKi is free after you log in.
PDF download is included in PrepKi plans. See plans.