Summary
A screw gauge turns a circular movement into a very small straight movement. The pitch is the distance the screw moves forward in one full turn of the circular scale. The least count (LC) is the smallest length it can read: pitch divided by the number of circular scale divisions.
With the jaws closed, the reading should be zero. If it is not, the instrument has a zero error. If the zero of the circular scale is above the reference line (the 0 has not reached it), the error is negative. If the zero has gone below the reference line, the error is positive. The correction is: corrected reading = observed reading − zero error (with its sign).
Key formulas
- Least count
- LC = pitch / number of circular divisions
- Pitch from LC
- pitch = LC × number of divisions
- Observed reading
- MSR + CSR × LC
- Corrected reading
- observed reading − zero error
- Zero error (zero above the line)
- −(N − n) × LC, n = division in line
- Zero error (zero below the line)
- + n × LC
- Diameter
- d = MSR + CSR × LC − zero error
- Cross-sectional area
- A = π d² / 4
- Fractional error in area
- ΔA/A = 2 Δd/d
- Mean of readings
- d̄ = (d₁ + d₂ + … + dₙ) / n
What this note covers
- Pitch, least count and zero error
- Diameter of a wire
- Thickness of a sheet
Solved past-paper question (NEET 2020)
A screw gauge has least count of 0.01 mm and there are 50 divisions in its circular scale. The pitch of the screw gauge is:
- (A) 0.25 mm
- (B) 0.5 mm
- (C) 1.0 mm
- (D) 0.01 mm
Solution
The least count is the pitch divided by the number of circular divisions.
LC = pitch / N
Rearrange to get the pitch.
pitch = LC × N
Substitute LC = 0.01 mm and N = 50.
pitch = 0.01 × 50 = 0.5 mm
Answer: (B) 0.5 mm
Common mistake: Mixing up the two quantities: LC is pitch divided by divisions, so the pitch is larger than the LC.
The full note has 5 solved questions, 5 practice questions, figures and a topic test. Reading it on PrepKi is free after you log in.
PDF download is included in PrepKi plans. See plans.