Summary
Elasticity is the property of a body to regain its original size and shape when the deforming force is removed. A body that does not regain its shape is plastic. No material is perfectly elastic: quartz and phosphor bronze come close, putty and wet clay are nearly perfectly plastic. Steel is more elastic than rubber: for the same stress it shows a much smaller strain, and elasticity is judged by the restoring tendency (large Young's modulus), not by how much a material stretches. Beyond the elastic limit the body is permanently deformed. Elastic fatigue is loss of strength after many cycles of stress.
Key formulas
- Stress
- σ = F/A (N m⁻²)
- Longitudinal strain
- ΔL/L
- Shearing strain
- Δx/L = tan θ ≈ θ
- Volumetric strain
- −ΔV/V
- Hooke's law
- stress ∝ strain; Y = (F/A)/(ΔL/L)
- Extension
- ΔL = FL/(AY) = FL/(πr²Y)
- Max load of a wire
- F = σ_break × A
- Greatest self-supported length
- L = σ_break/(ρg)
What this note covers
- Elasticity and plasticity
- Longitudinal, shearing and volumetric stress and strain
- Stress-strain curve
- Hooke's law
Solved past-paper question (NEET 2023)
Let a wire be suspended from the ceiling (rigid support) and stretched by a weight W attached at its free end. The longitudinal stress at any point of cross-sectional area A of the wire is:
- (A) W/A
- (B) W/2A
- (C) Zero
- (D) 2W/A
Solution
Longitudinal stress is the force acting normal to a cross-section divided by its area.
Cut the wire at any point. The part below that point has only the weight W (the wire's own weight is neglected), so the section must supply a force W.
F = W
Divide by the area.
Stress = F/A = W/A
Answer: (A) W/A
Common mistake: Writing W/2A or 2W/A; the weight is carried across the full cross-section A at every section.
The full note has 7 solved questions, 7 practice questions, figures and a topic test. Reading it on PrepKi is free after you log in.
PDF download is included in PrepKi plans. See plans.