Summary
For a wire stretched or compressed along its length, the elastic modulus is Young's modulus: the ratio of longitudinal stress to longitudinal strain, within the elastic limit (Hooke's law). It is a property of the material, so it does not depend on the length or the thickness of the wire.
When a body is squeezed equally from all sides, its volume decreases but its shape stays the same. The bulk modulus B is the ratio of the volumetric stress (the change in pressure) to the volumetric strain. The negative sign shows that the volume falls when the pressure rises.
Key formulas
- Young's modulus
- Y = FL/(AΔL)
- Extension
- ΔL = FL/(AY)
- Force constant of a wire
- k = YA/L
- Bulk modulus
- B = −ΔP/(ΔV/V)
- Compressibility
- k = 1/B
- Shear modulus
- G = (F/A)/θ = FL/(AΔx)
- Poisson's ratio
- σ = lateral strain / longitudinal strain
- Volume change on stretching
- ΔV/V = (ΔL/L)(1 − 2σ)
- Relations
- Y = 3B(1 − 2σ) = 2G(1 + σ)
What this note covers
- Young's modulus
- Bulk modulus and compressibility
- Shear modulus (modulus of rigidity)
- Poisson's ratio
Solved past-paper question (NEET 2024)
The maximum elongation of a steel wire of 1 m length if the elastic limit of steel and its Young's modulus, respectively, are 8 × 10⁸ N m⁻² and 2 × 10¹¹ N m⁻² is:
- (A) 40 mm
- (B) 8 mm
- (C) 4 mm
- (D) 0.4 mm
Solution
The elastic limit given is a stress, the largest stress for which Hooke's law holds: σ_max = 8 × 10⁸ N m⁻².
Maximum strain = stress/Y.
strain = 8 × 10⁸ / 2 × 10¹¹ = 4 × 10⁻³
Elongation = strain × original length.
ΔL = 4 × 10⁻³ × 1 m = 4 × 10⁻³ m
= 4 mm
Answer: (C) 4 mm
Common mistake: Stopping at the strain (4 × 10⁻³) and forgetting to multiply it by the length.
The full note has 10 solved questions, 10 practice questions, figures and a topic test. Reading it on PrepKi is free after you log in.
PDF download is included in PrepKi plans. See plans.