Summary
A bipolar junction transistor (BJT) is a three-layer device with two p-n junctions: the emitter-base junction and the collector-base junction. The layers are emitter (E), base (B) and collector (C). There are two types, npn (a p-layer between two n-layers) and pnp (an n-layer between two p-layers).
In the symbol, the arrow is on the emitter and shows the direction of conventional current in the emitter: outwards in npn, inwards in pnp. (Remember: npn, arrow Not Pointing iN.)
Key formulas
- Currents
- I_E = I_B + I_C
- Common base gain
- α = I_C/I_E = β/(1 + β)
- Common emitter gain
- β = I_C/I_B = α/(1 − α)
- Link
- 1/α − 1/β = 1
- a.c. gains
- α_ac = ΔI_C/ΔI_E; β_ac = ΔI_C/ΔI_B
- Voltage gain (CE)
- A_v = β_ac R_L/R_in
- Power gain (CE)
- A_p = β_ac² R_L/R_in = β_ac × A_v
- Transconductance
- g_m = ΔI_C/ΔV_BE = β/R_in
- Saturation current
- I_C(sat) = V_CC/R_C
- Base current for saturation
- I_B(min) = V_CC/(β R_C)
What this note covers
- Structure of npn and pnp transistors
- Transistor action and configurations
- Transistor as an amplifier
- Transistor as a switch
Solved past-paper question (MHT-CET 2019)
Which of the following regions of a transistors are respectively, heavily doped and lightly doped?
- (A) Collector and emitter
- (B) Base and emitter
- (C) Emitter and base
- (D) Emitter and collector
Solution
The emitter must supply many carriers, so it is heavily doped.
The base is thin and lightly doped so that most carriers cross it without recombining.
So the heavily doped region is the emitter and the lightly doped region is the base, that is, emitter and base in that order.
E (heavy), B (light)
Answer: (C) Emitter and base
Common mistake: Mixing up the order and calling the collector the heavily doped region.
The full note has 9 solved questions, 9 practice questions, figures and a topic test. Reading it on PrepKi is free after you log in.
PDF download is included in PrepKi plans. See plans.