Summary
A zener diode is a p-n junction that is heavily doped, so its depletion layer is very thin. It is made to be used in reverse bias. When the reverse voltage reaches the breakdown (zener) voltage V_Z, the current rises very sharply while the voltage across the diode stays almost constant at V_Z. In forward bias it behaves like an ordinary diode.
Breakdown happens by two processes. Below about 5 to 6 V the strong field pulls electrons out of the bonds (zener effect). Above that the fast carriers knock out more carriers (avalanche effect).
Key formulas
- Current through R_s
- I = (V_in − V_Z)/R_s
- Load current
- I_L = V_Z/R_L
- Zener current
- I_Z = I − I_L
- Zener power
- P = V_Z × I_Z
- Smallest R_s
- R_s(min) = (V_in − V_Z)/I_Zmax, with I_Zmax = P_max/V_Z
- Photon energy
- E = hν = hc/λ ≈ 1240/λ(nm) eV
- Wavelength from band gap
- λ(nm) ≈ 1240/E_g(eV)
What this note covers
- Zener diode and voltage regulator
- Photodiode
- Solar cell
- LED
Solved past-paper question (MHT-CET 2024)
A 5.0 V stabilized power supply is required using a 12 V DC input. Max power rating of zener diode is 2.0 W. Minimum series resistance Rs (Ω) is
- (A) 16.5
- (B) 17.5
- (C) 18.5
- (D) 15.5
Solution
The largest current the zener can carry follows from its power rating.
I_max = P/V_Z = 2.0/5
I_max = 0.4 A
The series resistor must limit the current to this value. The voltage across it is the input minus the zener voltage.
V_R = 12 − 5 = 7 V
The smallest safe resistance is found from Ohm's law.
R_s = 7/0.4 = 17.5 Ω
Answer: (B) 17.5
Common mistake: Using the full 12 V (instead of 12 − 5 = 7 V) across the series resistor.
The full note has 8 solved questions, 8 practice questions, figures and a topic test. Reading it on PrepKi is free after you log in.
PDF download is included in PrepKi plans. See plans.