Summary
When the current in a coil changes, its own flux changes and an emf is induced in the same coil. This is self-induction. The flux linked with the coil is proportional to the current: NΦ = LI. The constant L is the self-inductance of the coil. The induced emf is e = −L dI/dt. The SI unit is the henry (H): 1 H = 1 V s/A = 1 Wb/A. Dimensions: [M L² T⁻² A⁻²].
For a long air-cored solenoid of N turns, length l and cross-section A: L = μ₀N²A/l = μ₀n²Al, where n = N/l. With a core of relative permeability μr, L = μ₀μr n² A l. Self-inductance depends only on geometry and the core material. It…
Key formulas
- Self-induced emf
- e = −L dI/dt
- Flux linkage (self)
- NΦ = LI
- Solenoid inductance
- L = μ₀N²A/l = μ₀n²Al
- With core
- L = μ₀μr n²Al
- Series / parallel
- L = L₁ + L₂; 1/L = 1/L₁ + 1/L₂
- Mutual emf
- e₂ = −M dI₁/dt
- Flux linkage (mutual)
- N₂Φ₂ = M I₁
- Coupling
- k = M/√(L₁L₂), M = k√(L₁L₂)
- Coils in series with coupling
- L = L₁ + L₂ ± 2M
- Energy stored
- U = ½LI² = φ²/2L
What this note covers
- Self-inductance of a solenoid
- Mutual inductance of two coils
- Energy stored in an inductor
Solved past-paper question (MHT-CET 2026)
A coil of wire of radius r has 600 turns and a self-inductance of 108 mH. The self-inductance of a coil with same radius and 500 turns is
- (A) 80 mH
- (B) 75 mH
- (C) 108 mH
- (D) 90 mH
Solution
For coils of the same radius and length, L = μ₀N²A/l, so L is proportional to N².
L₂/L₁ = (N₂/N₁)²
Substitute N₁ = 600, N₂ = 500 and L₁ = 108 mH.
L₂ = 108 × (500/600)² = 108 × 25/36
Simplify.
L₂ = 75 mH
Answer: (B) 75 mH
Common mistake: Using L ∝ N (simple ratio 500/600) instead of L ∝ N².
The full note has 9 solved questions, 9 practice questions, figures and a topic test. Reading it on PrepKi is free after you log in.
PDF download is included in PrepKi plans. See plans.