Summary
An AC generator converts mechanical energy into electrical energy by electromagnetic induction. A coil of N turns and area A rotates with angular velocity ω in a uniform magnetic field B. The ends of the coil are connected to slip rings, which press against carbon brushes, so the alternating emf reaches the outside circuit.
With θ = ωt measured from the position where the coil is perpendicular to B: flux Φ = NBA cos ωt and emf e = NBAω sin ωt = e₀ sin ωt. The peak emf is e₀ = NBAω.
Key formulas
- Turns ratio
- Vₛ/Vₚ = Nₛ/Nₚ = Iₚ/Iₛ
- Power
- Vₚ Iₚ = Vₛ Iₛ (ideal)
- Efficiency
- η = (Vₛ Iₛ)/(Vₚ Iₚ) × 100%
- Step-up
- Nₛ > Nₚ: voltage rises, current falls
- Step-down
- Nₛ < Nₚ: voltage falls, current rises
- Generator emf
- e = NBAω sin ωt
- Peak emf
- e₀ = NBAω
- Frequency
- f = ω/2π
- Average power (resistor)
- ⟨P⟩ = e₀²/2R
- Transformer ratio
- Vₛ/Vₚ = Nₛ/Nₚ = Iₚ/Iₛ
What this note covers
- AC generator
- Transformer
Solved past-paper question (MHT-CET 2024)
In an a.c. generator, when the plane of the coil is perpendicular to the magnetic field
- (A) magnetic flux is zero and induced e.m.f. is maximum.
- (B) magnetic flux is maximum and induced e.m.f. is zero.
- (C) both magnetic flux and induced e.m.f. are maximum.
- (D) both magnetic flux and induced e.m.f. are zero.
Solution
Flux through the coil is Φ = BA cos θ, where θ is the angle between B and the normal to the coil.
Φ = NBA cos θ
When the plane of the coil is perpendicular to B, the normal is along B, so θ = 0 and the flux is maximum.
θ = 0 → Φ = NBA (maximum)
The emf is e = −dΦ/dt = NBAω sin θ. At θ = 0 this is zero.
e = NBAω sin 0 = 0
Answer: (B) magnetic flux is maximum and induced e.m.f. is zero.
Common mistake: Thinking the emf is maximum when the flux is maximum. Emf is the rate of change of flux, which is zero at maximum flux.
The full note has 6 solved questions, 6 practice questions, figures and a topic test. Reading it on PrepKi is free after you log in.
PDF download is included in PrepKi plans. See plans.