Summary
A conducting rod of length l moves with velocity v at right angles to a uniform field B. The free electrons in the rod feel the magnetic force and pile up at one end, so a potential difference appears between its ends. This is motional emf: e = Blv. In general, e = Blv sin θ, where θ is the angle between v and B (and l is perpendicular to both).
A rod of length l rotates about one end in a plane perpendicular to B with angular velocity ω. Different points move with different speeds, from 0 at the pivot to ωl at the free end. The average speed is ωl/2, so e = B l (ωl/2) = ½…
Key formulas
- Motional emf (straight rod)
- e = Blv sin θ
- Current in circuit
- I = Blv/R
- Force on the rod
- F = BIl = B²l²v/R
- Power
- P = Fv = B²l²v²/R
- Terminal velocity (falling rod)
- v = mgR/(B²l²)
- Rod rotating about one end
- e = ½ Bωl² = π B f l²
- Wheel (centre to rim)
- e = ½ BωR²
- Speed after falling h
- v = √(2gh)
What this note covers
- EMF in a moving rod
- Rotating rod or coil
Solved past-paper question (MHT-CET 2024)
A boat is moving due east in a region, where the earth's magnetic field is 3.6×10⁻⁵ N/(A m) due north and horizontal. The boat carries a vertical conducting rod 2 m long. If the speed of the boat is 2.00 m/s, the magnitude of the induced emf in the rod is
- (A) 1.4 mV
- (B) 0.72 mV
- (C) 0.54 mV
- (D) 0.144 mV
Solution
The rod is vertical, the boat moves east and the field is horizontal (north). So B, v and the rod are mutually perpendicular.
e = B l v
Substitute B = 3.6 × 10⁻⁵ T, l = 2 m, v = 2 m/s.
e = 3.6 × 10⁻⁵ × 2 × 2 = 14.4 × 10⁻⁵ V
Convert to millivolt.
e = 1.44 × 10⁻⁴ V = 0.144 mV
Answer: (D) 0.144 mV
Common mistake: Using the wrong component of Earth's field or forgetting to convert the final answer to mV.
The full note has 6 solved questions, 6 practice questions, figures and a topic test. Reading it on PrepKi is free after you log in.
PDF download is included in PrepKi plans. See plans.