Summary
A p-n junction is made inside a single crystal (it cannot be made by pressing a p-slab on an n-slab, because the surface would have gaps far larger than the atomic spacing). Holes diffuse from p to n and electrons diffuse from n to p. They recombine near the junction and leave behind immobile ions: negative acceptor ions on the p-side and positive donor ions on the n-side. This charged region has no free carriers and is the depletion region.
Key formulas
- Field in depletion layer
- E = V₀/d
- Charge balance across junction
- N_A x_p = N_D x_n
- Forward bias barrier
- V₀ − V (reverse: V₀ + V)
- Static, dynamic resistance
- R = V/I, r = ΔV/ΔI
- Series diode + resistor
- I = (V − V_drop)/R
- Threshold voltages
- Si 0.7 V, Ge 0.3 V
- Half-wave conduction (sin θ > V₀/V_m)
- 10 V peak, 5 V threshold: 1/3 of cycle
What this note covers
- Formation, depletion region and barrier potential
- Forward bias
- Reverse bias
- I-V characteristics of a junction diode
- Diode circuit problems
Solved past-paper question (JEE 2026)
In a semiconductor p-n diode, the doping concentrations on p-side and n-side are 10¹⁵ atoms/cm³ and 10¹⁸ atoms/cm³, respectively. Which one of the following statements is true ?
- (A) Widths of depletion region on either side of the interface are equal
- (B) The depletion region width is more on p-side compared to that in n-side
- (C) The depletion region width is more on n-side compared to that in p-side
- (D) No depletion region forms because of unequal doping concentrations on p and n-sides
Solution
The charge on the two sides of the depletion region must be equal in magnitude. Using N for the doping and x for the width on each side:
N_A x_p = N_D x_n
Here the p-side doping is 10¹⁵ atoms/cm³ and the n-side doping is 10¹⁸ atoms/cm³, so the n-side is far more heavily doped.
x_p / x_n = N_D / N_A = 10¹⁸/10¹⁵ = 1000
So the depletion region extends much more into the lightly doped p-side. A depletion region always forms, whatever the doping.
x_p > x_n
Answer: (B) The depletion region width is more on p-side compared to that in n-side
Common mistake: Thinking the heavily doped side has the wider region: charge on both sides must be equal, so the lightly doped side is wider.
The full note has 9 solved questions, 9 practice questions, figures and a topic test. Reading it on PrepKi is free after you log in.
PDF download is included in PrepKi plans. See plans.