PrepKiYour AI companion for entrance exam preparation
JEE PHYSICS NOTES

Diode and Transistor Experiments

JEE · Physics · Semiconductor Electronics: Materials, Devices and Simple Circuits · Std XII

Summary

To plot the characteristic, the diode is connected to a variable source through a series resistor. In forward bias (p-side to the positive terminal) a voltmeter is placed across the diode and a milliammeter in series. In reverse bias the current is tiny, so a microammeter replaces the milliammeter.

A Zener diode is a heavily doped p-n junction. In reverse bias, once the voltage reaches the Zener voltage V_Z, the narrow depletion layer breaks down and the current rises sharply while the voltage stays almost fixed at V_Z. This makes it a voltage regulator.

Key formulas

Static resistance at a point
R = V/I
Dynamic (a.c.) resistance
r_d = ΔV/ΔI (slope of the curve at constant bias)
Circuit with a Si diode and resistor R
I = (E − 0.7)/R
Current in the series resistor
I = (V_in − V_Z)/R_s
Load current
I_L = V_Z/R_L
Current in the Zener
I_Z = I − I_L
Maximum safe current
I_max = P_max/V_Z
Current gain
β = ΔI_C/ΔI_B (at constant V_CE)
Currents
I_E = I_B + I_C, I_C = βI_B
Input resistance
r_i = ΔV_BE/ΔI_B (at constant V_CE)

What this note covers

  • I-V characteristics of a p-n junction diode
  • I-V characteristics of a Zener diode
  • Common emitter characteristics of a transistor
  • Identifying diode, LED, transistor and IC

Solved past-paper question (JEE 2021)

A transistor is connected in common emitter circuit configuration, the collector supply voltage is 10 V and the voltage drop across a resistor of 1000 Ω in the collector circuit is 0.6 V. If the current gain factor (β) is 24, then the base current is ________ μA. (Round off to the Nearest Integer)

Solution

  1. The 0.6 V drop is across the collector resistor of 1000 Ω, so it fixes the collector current.

    I_C = 0.6/1000 = 6 × 10⁻⁴ A = 0.6 mA

  2. Current gain β = I_C/I_B, so the base current is I_C/β.

    I_B = 6 × 10⁻⁴/24 = 2.5 × 10⁻⁵ A

  3. In microamperes (answer is a whole number).

    I_B = 25 µA

Answer: 25

Common mistake: Treating 0.6 V as the base voltage or dividing 10 V by 1000 Ω: the collector current comes from the drop across R_C.

The full note has 8 solved questions, 8 practice questions, figures and a topic test. Reading it on PrepKi is free after you log in.

PDF download is included in PrepKi plans. See plans.

More notes in Semiconductor Electronics: Materials, Devices and Simple Circuits