Summary
Heat is energy in transit because of a temperature difference. Its SI unit is the joule (J); 1 cal = 4.186 J. The heat needed to change the temperature of a body by ΔT is Q = mcΔT, where c is the specific heat capacity (heat per unit mass per unit rise in temperature).
When bodies at different temperatures are mixed in an insulated vessel and no change of state occurs, heat lost by the hot bodies equals heat gained by the cold bodies. This is the principle of calorimetry and it is energy conservation.
Key formulas
- Heat for a temperature change
- Q = m c ΔT
- Heat capacity
- S = m c = Q/ΔT (J K⁻¹)
- Heat from a heater
- Q = P t
- Calorimetry principle
- heat lost = heat gained
- Final temperature of a mixture
- T = (m₁c₁T₁ + m₂c₂T₂)/(m₁c₁ + m₂c₂)
- Water equivalent
- W = m_c c_c / c_w
- Unit conversion
- 1 cal = 4.186 J
What this note covers
- Heat capacity and specific heat capacity
- Principle of calorimetry (mixtures)
- Water equivalent
Solved past-paper question (NEET 2020)
The quantities of heat required to raise the temperature of two solid copper spheres of radii r₁ and r₂ (r₁ = 1.5 r₂) through 1 K are in the ratio:
- (A) (9/4)
- (B) (3/2)
- (C) (5/3)
- (D) (27/8)
Solution
The heat for a rise of 1 K is Q = mcΔT with ΔT = 1 K. Both spheres are copper, so c is the same.
Q = m c (1)
So Q is proportional to the mass of the sphere.
Q ∝ m
Mass = density × volume, and for a solid sphere volume ∝ r³.
m ∝ r³
Take the ratio with r₁ = 1.5 r₂.
Q₁/Q₂ = (r₁/r₂)³ = (1.5)³ = 27/8
Answer: (D) (27/8)
Common mistake: Taking Q ∝ r² (surface area) or Q ∝ r instead of mass ∝ r³.
The full note has 7 solved questions, 7 practice questions, figures and a topic test. Reading it on PrepKi is free after you log in.
PDF download is included in PrepKi plans. See plans.