Summary
In an ac circuit the instantaneous power is p = vi. It changes sign during a cycle, so what matters in practice is its average over one full cycle. For v = V₀ sin ωt and i = I₀ sin(ωt − φ), the average is P = V_rms I_rms cos φ, where φ is the phase angle between voltage and current.
The factor cos φ is the power factor. It equals R/Z for a series LCR circuit, so it is 1 for a purely resistive circuit (or at resonance) and 0 for a pure inductor or pure capacitor. The average power can also be written P = I_rms² R, because only the resistor dissipates energy.
Key formulas
- Average power
- P = V_rms I_rms cos φ
- Power with peak values
- P = ½ V₀ I₀ cos φ
- Power in the resistor
- P = I_rms² R
- Power factor of series LCR
- cos φ = R/Z = R/√(R² + (X_L − X_C)²)
- Phase angle
- tan φ = (X_L − X_C)/R
- Wattless component of current
- I sin φ = I_rms √(1 − cos²φ)
- Resonant frequency and maximum power
- ω₀ = 1/√(LC); P_max = V²/R
- Half-power frequencies
- ω = ω₀ ± R/2L (approximately)
What this note covers
- Average power and power factor
- Wattless current
Solved past-paper question (NEET 2018)
An inductor 20 mH, a capacitor 100 μF and a resistor 50 Ω are connected in series across a source of emf, V = 10 sin 314 t. The power loss in the circuit is
- (A) 0.79 W
- (B) 0.43 W
- (C) 2.74 W
- (D) 1.13 W
Solution
Read the data: R = 50 Ω, L = 20 mH, C = 100 μF, ω = 314 rad/s, V₀ = 10 V. Power loss happens only in R, so P = I_rms² R.
V_rms = 10/√2 = 7.07 V
Find the two reactances.
X_L = ωL = 314 × 0.02 = 6.28 Ω
X_C = 1/(ωC) = 1/(314 × 10⁻⁴) = 31.85 Ω
Net reactance and impedance.
X = 31.85 − 6.28 = 25.57 Ω
Z = √(50² + 25.57²) = 56.16 Ω
Current and power.
I_rms = 7.07/56.16 = 0.126 A
P = I² R = (0.126)² × 50 ≈ 0.79 W
Answer: (A) 0.79 W
Common mistake: Using P = V_rms I_rms without the power factor, or using the peak voltage 10 V instead of the rms value.
The full note has 6 solved questions, 6 practice questions, figures and a topic test. Reading it on PrepKi is free after you log in.
PDF download is included in PrepKi plans. See plans.