Summary
Alternating current (AC) changes its magnitude continuously and reverses its direction periodically. In NCERT, the sinusoidal form is used: i = i₀ sin ωt and v = v₀ sin ωt, where ω = 2πf = 2π/T. The value at any instant is the instantaneous value; the largest value is the peak (amplitude) i₀ or v₀.
The rms value is defined through heating. An AC of rms value I produces the same heat in a resistor as a steady DC of value I. Since the average of sin² ωt over a cycle is ½, the mean of i² is i₀²/2, so i_rms = i₀/√2. AC voltmeters, ammeters and the mains rating (220 V, 230 V) are rms values, so the 220…
Key formulas
- Instantaneous values
- i = i₀ sin ωt, v = v₀ sin ωt
- Angular frequency
- ω = 2πf = 2π/T
- rms value
- i_rms = i₀/√2 ≈ 0.707 i₀; v_rms = v₀/√2
- Mean over a half cycle
- 2i₀/π ≈ 0.637 i₀ (full cycle: 0)
- Time from zero to rms level
- T/8
- Resultant of two phasors
- R = √(A² + B² + 2AB cos φ)
- Time lag for phase angle φ
- Δt = φ/ω = (φ/360°) T
What this note covers
- Instantaneous, peak, mean and rms values
- Phasors
Solved past-paper question (NEET 2026)
The peak value of an alternating current is 5 A and frequency is 60 Hz. How long will the current, starting from zero, take to reach the peak value?
- (A) 1/240 s
- (B) 1/30 s
- (C) 1/120 s
- (D) 1/60 s
Solution
A sine wave starts at zero and first reaches its peak after one quarter of a cycle.
zero → peak = T/4
Find the period from the frequency.
T = 1/f = 1/60 s
Divide by 4.
t = (1/60)/4 = 1/240 s
The peak value 5 A is not needed. Zero to peak is always T/4.
Answer: (A) 1/240 s
Common mistake: Using T/2 or T for the time instead of T/4, or using the peak value 5 A in the answer.
The full note has 7 solved questions, 7 practice questions, figures and a topic test. Reading it on PrepKi is free after you log in.
PDF download is included in PrepKi plans. See plans.