PrepKiYour AI companion for entrance exam preparation
NEET PHYSICS NOTES

Fluids in motion

NEET · Physics · Mechanical Properties of Fluids · Std XI

Summary

In steady (streamline) flow the velocity of the fluid at any given point does not change with time. Each particle that passes a point follows the same path, called a streamline. The tangent to a streamline gives the direction of the velocity at that point, and two streamlines never cross. When the speed exceeds a critical value, the flow becomes irregular and turbulent, with eddies.

The Reynolds number is a dimensionless number that decides whether the flow is streamline or turbulent. For a pipe of diameter D and mean speed v, with fluid density ρ and viscosity η, it is Re = ρvD/η. As a rule, flow is streamline for Re below about 1000, turbulent above about 2000, and unstable…

Key formulas

Reynolds number
Re = ρ v D / η
Nature
Re < 1000 streamline; Re > 2000 turbulent
Critical speed
v_c = Re_c η / (ρ D)
Dimensions
Re is a pure number
Continuity
A₁v₁ = A₂v₂ = constant
Flow rate
Q = A v (m³ s⁻¹)
Circular pipe
A = πr², so v ∝ 1/r²
Time to fill a tank
t = V / Q
Bernoulli's equation
p + ½ρv² + ρgh = constant
Horizontal pipe
p₁ − p₂ = ½ρ(v₂² − v₁²)

What this note covers

  • Streamline and turbulent flow
  • Reynolds number
  • Equation of continuity
  • Bernoulli's equation and applications

Solved past-paper question (NEET 2019)

A small hole of area of cross-section 2 mm² is present near the bottom of a fully filled open tank of height 2 m. Taking g = 10 m/s², the rate of flow of water through the open hole would be nearly:

  1. (A) 2.23 × 10⁻⁶ m³/s
  2. (B) 6.4 × 10⁻⁶ m³/s
  3. (C) 12.6 × 10⁻⁶ m³/s
  4. (D) 8.9 × 10⁻⁶ m³/s

Solution

  1. Find the speed of efflux from the hole at a depth h = 2 m.

    v = √(2gh) = √(2 × 10 × 2) = √40 ≈ 6.3 m s⁻¹

  2. Convert the area: 2 mm² = 2 × 10⁻⁶ m².

  3. Rate of flow = area × speed.

    Q = A v = 2 × 10⁻⁶ × 6.3

  4. Calculate.

    Q ≈ 12.6 × 10⁻⁶ m³ s⁻¹

Answer: (C) 12.6 × 10⁻⁶ m³/s

Common mistake: Forgetting to convert 2 mm² to m² (2 × 10⁻⁶ m²).

The full note has 8 solved questions, 8 practice questions, figures and a topic test. Reading it on PrepKi is free after you log in.

PDF download is included in PrepKi plans. See plans.

More notes in Mechanical Properties of Fluids