Summary
Pressure is the normal force per unit area, P = F/A, in pascal (1 Pa = 1 N m⁻²). In a liquid at rest the pressure at depth h is P = P₀ + hρg, where P₀ is the pressure at the surface. Pressure depends only on depth, density and g, not on the shape of the vessel or the amount of liquid (hydrostatic paradox). Pressure at a point acts equally in all directions, and all points at the same level in a connected liquid have the same pressure.
Key formulas
- Pressure
- P = F/A (Pa = N m⁻²)
- Pressure at depth h
- P = P₀ + hρg
- Gauge pressure
- P_gauge = P_abs − P_atm = hρg
- Barometer
- P_atm = hρg ; 1 atm = 76 cm Hg ≈ 1.013 × 10⁵ Pa
- Two liquids in U-tube
- h₁ρ₁ = h₂ρ₂
- Hydraulic lift
- F₁/A₁ = F₂/A₂ ; F₁d₁ = F₂d₂
- Soap bubble excess pressure
- ΔP = 4T/r
What this note covers
- Pressure and depth (p = hρg)
- Atmospheric pressure and the barometer
- Gauge and absolute pressure
- Pascal's law: hydraulic lift and brakes
Solved past-paper question (NEET 2019)
A soap bubble, having radius of 1 mm, is blown from a detergent solution having a surface tension of 2.5 × 10⁻² N/m. The pressure inside the bubble equals at a point Z₀ below the free surface of water in a container. Taking g = 10 m/s², density of water = 10³ kg/m³, the value of Z₀ is:
- (A) 1 cm
- (B) 0.5 cm
- (C) 100 cm
- (D) 10 cm
Solution
A soap bubble has two surfaces, so the excess pressure inside is 4T/r.
ΔP = 4T/r = 4 × 2.5 × 10⁻² / 10⁻³ = 100 Pa
This excess pressure equals the pressure of a water column of height Z₀ (the hydrostatic pressure at that depth).
Z₀ρg = 100
Solve for Z₀.
Z₀ = 100 / (10³ × 10) = 10⁻² m = 1 cm
Answer: (A) 1 cm
Common mistake: Using the total bubble pressure 4T/r as pressure at depth instead of the excess pressure, or forgetting that a soap bubble has two surfaces (4T/r, not 2T/r).
The full note has 7 solved questions, 7 practice questions, figures and a topic test. Reading it on PrepKi is free after you log in.
PDF download is included in PrepKi plans. See plans.