Summary
A p-n junction is made inside a single crystal, with one side doped p-type and the other n-type. Right at the junction there is a big difference in concentration. Electrons are plentiful on the n-side and scarce on the p-side, and holes are the opposite. So electrons diffuse from n to p and holes diffuse from p to n.
In forward bias the p-side is connected to the positive terminal of the battery and the n-side to the negative terminal. The battery field opposes the internal field. So the barrier potential falls and the depletion region becomes narrower.
Key formulas
- Average field in depletion region
- E ≈ V₀ / W
- Barrier potential
- V₀ ≈ 0.7 V (Si), 0.3 V (Ge)
- Current in a forward-biased circuit
- I = (V_source − V_k) / R
- Several diodes in series
- total drop = sum of the V_k values
- Diode equation
- I = I₀ (e^(eV/kT) − 1)
- Static resistance
- R = V / I
- Temperature effect on I₀
- I₀ doubles for every 10 °C rise (about)
What this note covers
- Formation, depletion region and barrier potential
- Forward bias
- Reverse bias
- I-V characteristics of a junction diode
Solved past-paper question (MHT-CET 2025)
In an unbiased p-n junction diode,
- (A) the potential is same everywhere
- (B) there is an electric field at the p-type side directed from the n-type side to the p-type side
- (C) there is an electric field at the junction directed from the n-type side to the p-type side
- (D) the p-type side is at higher potential than the n-type side
Solution
At the junction, electrons diffuse from n to p and holes from p to n. They recombine and leave fixed ions behind.
The n-side near the junction is left with positive donor ions. The p-side is left with negative acceptor ions.
n-side: +, p-side: −
An electric field points from positive charge to negative charge. So it points from the n-side to the p-side.
E: n → p
The potential is higher on the n-side. So the potential is not the same everywhere, and the p-side is not higher.
Only option (C) matches: a field at the junction directed from the n-side to the p-side.
Answer: (C) there is an electric field at the junction directed from the n-type side to the p-type side
Common mistake: Choosing (D) 'p-side at higher potential'. That would drive current easily, but an unbiased junction has its n-side at higher potential.
The full note has 8 solved questions, 8 practice questions, figures and a topic test. Reading it on PrepKi is free after you log in.
PDF download is included in PrepKi plans. See plans.