PrepKiYour AI companion for entrance exam preparation
MHT-CET PHYSICS NOTES

Applications of Semiconductors

MHT-CET · Physics · Semiconductors · Std XI

Summary

A junction diode conducts easily when forward biased and hardly at all when reverse biased. This one-way behaviour is behind all its uses. (Special diodes such as Zener diodes, LEDs and photodiodes belong to the Std XII chapter.)

Half-wave rectification works like this. During the positive half-cycle the diode is forward biased and current flows through the load. During the negative half-cycle the diode is reverse biased and no current flows. The output across the load is a series of positive pulses with the same frequency as the input. It is unidirectional, but it is not steady: it needs a filter (a capacitor) to be smoothed.

Key formulas

Half-wave rectifier output frequency
f_out = f_in
Peak output of a half-wave rectifier
V_peak(out) ≈ V_peak(in) − V_k
Temperature coefficient of resistance
α = (R₂ − R₁) / (R₁ ΔT)
NTC thermistor
α < 0: R falls as T rises
Metal wire
α > 0 and small

What this note covers

  • Semiconductor diode uses
  • Thermistor

Solved past-paper question (MHT-CET 2025)

If an alternating voltage is applied across a p-n junction diode in series with a load, then

  1. (A) no voltage appears across the load
  2. (B) a pulsating voltage appears across the load
  3. (C) an AC voltage appears across the load
  4. (D) a DC voltage appears across the load which is not pulsating

Solution

  1. The AC voltage drives the diode and the load in series. The diode is forward biased only in the positive half-cycle.

  2. In the positive half-cycle current flows and a voltage appears across the load. In the negative half-cycle the diode is reverse biased, so the load voltage is zero.

    positive half: V_load > 0, negative half: V_load = 0

  3. So the load voltage is always in one direction, but it rises and falls with each cycle. It is not AC, because it never reverses. It is not steady, because it keeps varying.

  4. This is a pulsating voltage. The answer is (B).

Answer: (B) a pulsating voltage appears across the load

Common mistake: Choosing (D) 'DC which is not pulsating'. Smooth DC needs a filter after the rectifier.

The full note has 3 solved questions, 5 practice questions, figures and a topic test. Reading it on PrepKi is free after you log in.

PDF download is included in PrepKi plans. See plans.

More notes in Semiconductors