Summary
When a solid rod is heated, its length increases. For a small rise in temperature Δθ, the change in length is ΔL = αL₀Δθ, so the new length is L = L₀(1 + αΔθ). The constant α is the coefficient of linear expansion (unit °C⁻¹ or K⁻¹).
For a plate, both length and breadth expand. The area changes as ΔA = βA₀Δθ, where the coefficient of superficial expansion β = 2α. The new area is A = A₀(1 + βΔθ). A hole in a plate expands in the same way as if it were made of the plate's material.
Key formulas
- Linear expansion
- ΔL = αL₀Δθ, L = L₀(1 + αΔθ)
- Area expansion
- ΔA = βA₀Δθ, β = 2α
- Volume expansion
- ΔV = γV₀Δθ, γ = 3α
- Ratio of coefficients
- α : β : γ = 1 : 2 : 3
- Density after heating
- ρ = ρ₀/(1 + γΔθ) ≈ ρ₀(1 − γΔθ)
- Apparent expansion of a liquid
- γ_app = γ_liquid − γ_vessel
- Pendulum clock
- ΔT/T = ½αΔθ
- Thermal stress
- σ = YαΔθ, F = YAαΔθ
- Rods in series
- α = (α₁L₁ + α₂L₂)/(L₁ + L₂)
What this note covers
- Linear expansion
- Area (superficial) expansion
- Volume (cubical) expansion
- Relation between α, β and γ
- Anomalous expansion of water
- Thermal stress
Solved past-paper question (JEE 2026)
A pendulum clock gives correct time at 20°C. If the coefficient of linear expansion of the pendulum’s material is α = 1.2 × 10⁻⁵/°C, the clock will lose time per day at 40°C by approximately:
- (A) 10.4 s
- (B) 5.2 s
- (C) 20.8 s
- (D) 2.6 s
Solution
The time period of a pendulum is T = 2π√(L/g), so T ∝ √L.
ΔT/T = ½ ΔL/L = ½ αΔθ
Substitute α = 1.2 × 10⁻⁵ °C⁻¹ and Δθ = 40 − 20 = 20 °C.
ΔT/T = ½ × 1.2 × 10⁻⁵ × 20 = 1.2 × 10⁻⁴
The pendulum is longer, so the clock runs slow and loses time. In one day there are 86,400 s.
loss = 86,400 × 1.2 × 10⁻⁴ ≈ 10.4 s
Answer: (A) 10.4 s
Common mistake: Dropping the ½ and getting about 20.8 s.
The full note has 9 solved questions, 9 practice questions, figures and a topic test. Reading it on PrepKi is free after you log in.
PDF download is included in PrepKi plans. See plans.