PrepKiYour AI companion for entrance exam preparation
JEE PHYSICS NOTES

Heat Transfer

JEE · Physics · Thermal Properties of Matter · Std XI

Summary

Conduction is the flow of heat through matter from particle to particle, with no bulk movement of the material. It is the main mode in solids, especially metals. In the steady state, the temperature at each point stops changing and the same heat current flows through every cross-section.

For a rod of length L, area A and conductivity K with end temperatures T₁ > T₂: H = dQ/dt = KA(T₁ − T₂)/L. The unit of K is W m⁻¹ K⁻¹. The thermal resistance is R = L/(KA) (unit K W⁻¹), so H = ΔT/R. This is Ohm's law with H as current, ΔT as potential difference and R as resistance.

Key formulas

Conduction (slab or rod)
H = KA(T₁ − T₂)/L
Thermal resistance
R = L/(KA); H = ΔT/R
Spherical shell (radial)
H = 4πK r₁r₂ (T₁ − T₂)/(r₂ − r₁)
Series
R = R₁ + R₂; K_eq = ΣL/Σ(L/K)
Parallel
1/R = 1/R₁ + 1/R₂; K_eq = ΣKA/ΣA
Interface (series)
θ = (θ₁R₂ + θ₂R₁)/(R₁ + R₂)
Junction of rods
Σ (Tᵢ − T)/Rᵢ = 0
Ice on a pond
t = ρLx²/(2Kθ); x² ∝ t
Net radiation (black body)
P = σA(T⁴ − T₀⁴), T in kelvin

What this note covers

  • Conduction and thermal conductivity
  • Slabs in series and parallel
  • Temperature of the interface
  • Ice formation on a pond
  • Convection
  • Radiation

Solved past-paper question (JEE 2021)

Two thin metallic spherical shells of radii r₁ and r₂ (r₁<r₂) are placed with their centres coinciding. A material of thermal conductivity K is filled in the space between the shells. The inner shell is maintained at temperature θ₁ and the outer shell at temperature θ₂(θ₁<θ₂). The rate at which heat flows radially through the material is :

  1. (A) (4π Kr₁r₂(θ₂-θ₁))/(r₂-r₁)
  2. (B) (K(θ₂-θ₁)(r₂-r₁))/(4π r₁r₂)
  3. (C) (K(θ₂-θ₁))/(r₂-r₁)
  4. (D) (π r₁r₂(θ₂-θ₁))/(r₂-r₁)

Solution

  1. Take a thin shell of radius r and thickness dr. The heat current through it is the same for every shell in the steady state.

    H = −K(4πr²)(dT/dr)

  2. Separate the variables.

    H dr/r² = −4πK dT

  3. Integrate from r₁ (temperature θ₁) to r₂ (temperature θ₂).

    H(1/r₁ − 1/r₂) = −4πK(θ₂ − θ₁)

    H(r₂ − r₁)/(r₁r₂) = −4πK(θ₂ − θ₁)

  4. Solve for H. H comes out negative: the flow is radially inward, since the outer shell is hotter. The magnitude is

    |H| = 4πK r₁r₂(θ₂ − θ₁)/(r₂ − r₁)

Answer: (A) (4π Kr₁r₂(θ₂-θ₁))/(r₂-r₁)

Common mistake: Using the slab formula KAΔT/L with a single area. The area 4πr² grows with r, so the formula must be integrated.

The full note has 8 solved questions, 8 practice questions, figures and a topic test. Reading it on PrepKi is free after you log in.

PDF download is included in PrepKi plans. See plans.

More notes in Thermal Properties of Matter