Summary
The instantaneous power in an AC circuit, p = v·i, swings up and down at twice the supply frequency. What matters in practice is its average over a full cycle. For v = V₀ sin ωt and i = I₀ sin (ωt − φ), the average power is P = V_rms · I_rms · cos φ. Here φ is the phase angle between voltage and current, and cos φ is called the power factor.
In a series LCR circuit, tan φ = (X_L − X_C)/R and cos φ = R/Z, with Z = √(R² + (X_L − X_C)²). Only the resistor dissipates energy, so P = I²R = I_rms² R. The inductor and the capacitor store energy and return it…
Key formulas
- Average power
- P = V_rms I_rms cos φ = ½ V₀ I₀ cos φ
- Power factor, series LCR
- cos φ = R/Z = R/√(R² + (X_L − X_C)²)
- Phase angle
- tan φ = (X_L − X_C)/R
- Power from the resistor
- P = I_rms² R
- Power at resonance
- P_max = V_rms²/R
- Apparent power
- S = V_rms I_rms (VA)
- Wattless current
- I sin φ = I_rms sin φ
- Choke coil
- I = V/√(R² + ω²L²)
What this note covers
- Average power and power factor
- Wattless current
- Choke coil
Solved past-paper question (JEE 2026)
A LCR series circuit driven with E_rms = 90 V at frequency f_d = 30 Hz has resistance R = 80 Ω, an inductance with inductive reactance X_L = 20.0 Ω and capacitance with capacitive reactance X_C = 80.0 Ω. The power factor of the circuit is ____.
- (A) 0.8
- (B) 0.64
- (C) 0.9
- (D) 0.5
Solution
Find the net reactance. Its sign only tells whether the circuit is capacitive or inductive.
X = X_L − X_C = 20 − 80 = −60 Ω
Find the impedance with the net reactance.
Z = √(R² + X²) = √(80² + 60²) = 100 Ω
The power factor is the ratio of resistance to impedance.
cos φ = R/Z = 80/100 = 0.8
The 90 V and 30 Hz are not needed for the power factor.
Answer: (A) 0.8
Common mistake: Using X_L + X_C, or forgetting that the sign of (X_L − X_C) does not matter for the power factor.
The full note has 7 solved questions, 7 practice questions, figures and a topic test. Reading it on PrepKi is free after you log in.
PDF download is included in PrepKi plans. See plans.