Summary
Ampère's circuital law: the line integral of B round any closed path equals μ₀ times the current passing through the surface bounded by that path. It is used when the symmetry lets B be taken out of the integral.
For a long solenoid with n turns per unit length, take a rectangle with one side of length l inside, parallel to the axis, and the other side outside, where the field is nearly zero. The enclosed current is n l I, so B l = μ₀ n l I.
Key formulas
- Ampère's circuital law
- ∮ B · dl = μ₀ I_enc
- Long straight wire, distance r
- B = μ₀I/2πr
- Open arc subtending angle θ at the wire
- ∫ B · dl = (μ₀I/2π) θ
- Field well inside a long solenoid
- B = μ₀nI = μ₀NI/L
- Field on the axis at one end
- B = ½μ₀nI
- Field outside (ideal)
- B ≈ 0
- Electron circling inside: radius, period
- r = mv/eB; T = 2πm/eB (independent of v)
- Field in the core at distance r
- B = μ₀NI/2πr
- Thin toroid (mean radius r₀)
- B ≈ μ₀nI, with n = N/2πr₀
- Outside the core and in the hole
- B = 0
What this note covers
- Field of a long straight wire
- Field of a solenoid
- Field of a toroid
- Field inside and outside a thick wire
Solved past-paper question (JEE 2024)
An infinitely long wire, located on the z-axis, carries a current I along the +z-direction and produces the magnetic field \vecB. The magnitude of the line integral \int\vecB· d\vecl along a straight line from the point (-√(3)a,a,0) to (a,a,0) is given by [μ₀ is the magnetic permeability of free space.]
- (A) 7μ₀I/24
- (B) 7μ₀I/12
- (C) μ₀I/8
- (D) μ₀I/6
Solution
B is tangential round the z-axis with magnitude μ₀I/2πr, so along any path B·dl = (μ₀I/2π) dθ, where θ is the polar angle about the wire.
∫ B · dl = (μ₀I/2π) × Δθ
The path runs along y = a. The start point (−√3a, a) lies at 150° from the x-axis, because tan θ = a/(−√3a) in the second quadrant. The end point (a, a) lies at 45°.
θ₁ = 150°, θ₂ = 45°
The angle swept (the line does not pass through the axis) is 105°, which is 7π/12 radian.
Δθ = 105° = 7π/12
Substitute.
∫ B · dl = (μ₀I/2π)(7π/12) = 7μ₀I/24
Answer: (A) 7μ₀I/24
Common mistake: Writing μ₀I for the integral. The path is an open straight line, so only the angle it subtends at the wire counts.
The full note has 8 solved questions, 8 practice questions, figures and a topic test. Reading it on PrepKi is free after you log in.
PDF download is included in PrepKi plans. See plans.