Summary
A rigid body turning about a fixed axis is described by the angle θ (radian), angular velocity ω = dθ/dt (rad s⁻¹) and angular acceleration α = dω/dt (rad s⁻²). Convert revolutions per minute with ω = 2πN/60, where N is in rpm. One revolution is 2π rad.
The angular velocity and angular acceleration are axial vectors: they lie along the axis of rotation, not along the radius or the tangent. The right-hand rule gives the direction. For a point at distance r: v = rω, tangential acceleration a_t = rα and centripetal acceleration a_c = rω².
Key formulas
- Angular velocity and acceleration
- ω = dθ/dt, α = dω/dt
- Rotation equations
- ω = ω₀ + αt, θ = ω₀t + ½αt², ω² = ω₀² + 2αθ
- Link with linear motion
- v = rω, a_t = rα, a_c = rω²
- rpm to rad s⁻¹
- ω = 2πN/60
- Torque
- τ = rF sin θ, τ = Iα
- Rotational kinetic energy
- K = ½Iω² = L²/2I
- Work and power
- W = τθ, P = τω, W = ΔK
What this note covers
- Kinematics of rotation
- Torque and τ = Iα
- Rotational kinetic energy
- Work and power in rotation
Solved past-paper question (NEET 2026)
The angular speed of a flywheel is increased from 600 rpm to 1200 rpm in 10 s. The number of revolutions completed during this time is:
- (A) 600
- (B) 900
- (C) 300
- (D) 150
Solution
Keep the angular speeds in revolutions per second so that the answer comes out in revolutions. The speed rises uniformly, so use the average.
ω₀ = 600 rpm = 10 rev s⁻¹
ω = 1200 rpm = 20 rev s⁻¹
Use the average speed for uniform angular acceleration.
average = (10 + 20)/2 = 15 rev s⁻¹
Multiply by the time of 10 s.
revolutions = 15 × 10 = 150
Check in radians: α and θ give the same result.
θ = 150 × 2π = 300π rad
Answer: (D) 150
Common mistake: Putting rpm values straight into the equations and reading the answer as revolutions per second.
The full note has 8 solved questions, 8 practice questions, figures and a topic test. Reading it on PrepKi is free after you log in.
PDF download is included in PrepKi plans. See plans.