Summary
When a conducting rod of length l moves with velocity v through a magnetic field B, free charges in it feel the force qv × B and pile up at the ends. This gives a motional emf ε = B l v when B, l and v are mutually perpendicular. For a general case, only the component of B perpendicular to the plane of l and v counts: ε = B l v sin θ.
For a rod of length l rotating about one end with angular speed ω in a field B perpendicular to its plane, the speed of a point at distance r is ωr. Integrating B(ωr)dr from 0 to l gives ε = ½ B ω l².…
Key formulas
- Motional emf
- ε = B l v sin θ
- Rod rotating about one end
- ε = ½ B ω l² = π B f l²
- Rotating coil (maximum)
- ε₀ = N B A ω
- Induced current
- I = B l v / R
- Magnetic force on the rod
- F = B I l = B² l² v / R
- Power / heat rate
- P = F v = B² l² v² / R
- Terminal speed (incline θ)
- v = m g R sin θ / (B² l²)
What this note covers
- EMF in a moving rod
- Rotating rod or coil
- Induced current and force on the rod
Solved past-paper question (NEET 2026)
A rectangular wire loop of sides 8 cm and 3 cm with a small cut is moving out of a region of uniform magnetic field 0.3 T normal to the loop's plane, with velocity 2 cm/s normal to the shorter side. The emf developed across the cut will be:
- (A) 1.8×10⁻⁴ volt
- (B) 1.2×10⁻⁴ volt
- (C) 1.3×10⁻⁴ volt
- (D) 4.8×10⁻⁴ volt
Solution
The velocity is normal to the shorter side, so the shorter side (3 cm) is the one cutting the field lines. The longer sides slide along their own length and give no emf.
l = 3 cm = 0.03 m
Convert the speed.
v = 2 cm/s = 0.02 m s⁻¹
Motional emf across the cut.
ε = B l v = 0.3 × 0.03 × 0.02
ε = 1.8 × 10⁻⁴ V
Answer: (A) 1.8×10⁻⁴ volt
Common mistake: Using the longer side (8 cm) as the length cutting the field; the side perpendicular to the velocity is the shorter one, 3 cm.
The full note has 7 solved questions, 7 practice questions, figures and a topic test. Reading it on PrepKi is free after you log in.
PDF download is included in PrepKi plans. See plans.