Summary
When a ferromagnetic specimen is magnetised and demagnetised by changing the magnetising field H, its magnetisation (and the flux density B) lags behind H. This lag is called hysteresis. Starting from an unmagnetised specimen, B rises along the first magnetisation (virgin) curve to saturation. When H is reduced to zero, B does not fall to zero. It is only brought to zero by a reverse field, and a full cycle of H traces a closed B–H loop.
Two intercepts of the hysteresis loop are important. Retentivity (remanence) is the value of B (or magnetisation) that remains in the specimen when the magnetising field is reduced to zero: it is the intercept on the B-axis. Coercivity is the reverse magnetising field…
Key formulas
- Retentivity
- B at H = 0 (intercept on the B-axis)
- Coercivity
- H at B = 0 (intercept on the H-axis); unit A m⁻¹
- Field of a solenoid
- H = nI (n = turns per metre)
- Current to demagnetise
- I = Hc/n
- Unit conversion
- 20 turns per cm = 2000 turns per m
- Energy lost per unit volume per cycle
- W = ∮H dB = area of the B–H loop
- Power lost in a core
- P = (area) × V × f
- Solenoid field
- H = nI
- Demagnetising current
- I = Hc/n
- Curie temperature
- Ferromagnetic below Tc, paramagnetic above Tc
What this note covers
- Hysteresis loop
- Retentivity and coercivity
- Choice of materials for permanent magnets and electromagnets
The full note has 6 solved questions, 6 practice questions, figures and a topic test. Reading it on PrepKi is free after you log in.
PDF download is included in PrepKi plans. See plans.