Summary
A moving coil galvanometer detects small currents. A coil of N turns and area A, free to turn between curved pole pieces around a soft iron core, carries the current I. The field is radial, so the plane of the coil is always parallel to B and the torque is NIAB for every deflection. A spring gives a restoring torque kφ. In equilibrium NIAB = kφ, so the deflection is proportional to the current: φ = (NAB/k) I. The scale is linear.
Key formulas
- Deflection
- φ = (NAB/k) I
- Current sensitivity
- Is = φ/I = NAB/k
- Voltage sensitivity
- Vs = φ/V = NAB/(kR) = Is/R (R = resistance of the coil)
- Galvanometer resistance from the two
- R = Is/Vs
- To raise current sensitivity
- increase N, A, B; reduce k
- Same voltage across G and S
- Ig G = (I − Ig) S
- Shunt resistance
- S = Ig G/(I − Ig)
- Fraction through the galvanometer
- Ig/I = S/(G + S)
- Resistance of the ammeter
- R_A = GS/(G + S) ≈ S (very small)
- Ideal ammeter
- zero resistance, connected in series
What this note covers
- Moving coil galvanometer
- Galvanometer into ammeter (shunt)
- Galvanometer into voltmeter (series resistance)
Solved past-paper question (NEET 2018)
Current sensitivity of a moving coil galvanometer is 5 div/mA and its voltage sensitivity (angular deflection per unit voltage applied) is 20 div/V. The resistance of the galvanometer is
- (A) 40 Ω
- (B) 25 Ω
- (C) 250 Ω
- (D) 500 Ω
Solution
Current sensitivity is deflection per unit current, voltage sensitivity is deflection per unit voltage.
Is = φ/I, Vs = φ/V
For the same deflection φ, divide them.
Is/Vs = V/I = R
Convert units: 5 div/mA = 5000 div/A.
R = 5000/20
Compute.
R = 250 Ω
Answer: (C) 250 Ω
Common mistake: Multiplying the two sensitivities instead of dividing. Is = Vs × R.
The full note has 6 solved questions, 6 practice questions, figures and a topic test. Reading it on PrepKi is free after you log in.
PDF download is included in PrepKi plans. See plans.