Summary
In an electrolytic cell electrical energy drives a non-spontaneous reaction. The cathode is negative (reduction) and the anode is positive (oxidation): the signs are opposite to a galvanic cell, but reduction is always at the cathode and oxidation at the anode. Molten NaCl has only Na⁺ and Cl⁻ ions, so only they can be discharged.
In an aqueous solution water also takes part. At the cathode the species with the higher reduction potential is reduced: water (E° = −0.83 V for 2H₂O + 2e⁻ → H₂ + 2OH⁻) beats Na⁺ (E° = −2.71 V). At the anode Cl⁻ should lose out to water on E° (1.36 V against 1.23 V), but O₂ evolution has a large overpotential, so Cl₂ is…
Key formulas
- Charge
- Q = I × t
- Mass deposited
- m = (M × I × t) ÷ (n × 96500)
- Moles of e⁻
- n(e⁻) = Q ÷ 96500
- Cells in series
- m₁ ÷ m₂ = E₁ ÷ E₂, E = M ÷ n
- Gas volume at STP
- V = moles × 22.4 L
- Current efficiency
- Actual mass = efficiency × calculated mass
- Cathode, molten NaCl
- Na⁺ + e⁻ → Na
- Anode, molten NaCl
- 2Cl⁻ → Cl₂ + 2e⁻
- Cathode, aqueous NaCl
- 2H₂O + 2e⁻ → H₂ + 2OH⁻
- Mass (Faraday)
- m = M I t ÷ (n × 96500)
What this note covers
- Electrolysis of molten NaCl
- Electrolysis of aqueous NaCl
- Faraday's laws of electrolysis
Solved past-paper question (NEET 2020)
On electrolysis of dil. sulphuric acid using Platinum (Pt) electrode, the product obtained at anode will be _______.
- (A) Oxygen gas
- (B) H₂S gas
- (C) SO₂ gas
- (D) Hydrogen gas
Solution
Dilute H₂SO₄ contains H⁺, SO₄²⁻ and water. Pt electrodes are inert.
At the anode water is oxidised more easily than sulphate ions.
2H₂O → O₂ + 4H⁺ + 4e⁻
So oxygen is the anode product. Hydrogen is formed at the cathode.
Cathode: 2H⁺ + 2e⁻ → H₂
Answer: (A) Oxygen gas
Common mistake: Choosing SO₂ or H₂S because sulphur is in the electrolyte; sulphate ions are not discharged.
The full note has 8 solved questions, 8 practice questions, figures and a topic test. Reading it on PrepKi is free after you log in.
PDF download is included in PrepKi plans. See plans.