PrepKiYour AI companion for entrance exam preparation
MHT-CET PHYSICS NOTES

Thermal expansion

MHT-CET · Physics · Thermal Properties of Matter · Std XI

Summary

On heating, a solid expands in length, area and volume. For a rod of original length L, a rise in temperature ΔT gives an increase ΔL = LαΔT, where α is the coefficient of linear expansion. Its unit is per °C or per K (the same number). The new length is L′ = L(1 + αΔT). The value of α depends on the material, not on the size of the body.

A hole in a plate expands exactly as if it were made of the same material: the hole gets bigger when heated. A bimetallic strip joins two metals with different α. On heating, the metal with the larger α expands more and lies on the outside (convex side) of…

Key formulas

Linear expansion
ΔL = LαΔT, L′ = L(1 + αΔT)
Area expansion
ΔA = βAΔT, β = 2α
Volume expansion
ΔV = γVΔT, γ = 3α
Ratio of coefficients
α : β : γ = 1 : 2 : 3
Density on heating
ρ = ρ₀/(1 + γΔT) ≈ ρ₀(1 − γΔT)
Apparent expansion
γ_real = γ_apparent + γ_vessel
Rods of constant difference
α₁L₁ = α₂L₂
Thermal stress
stress = YαΔT, F = YAαΔT
Per °F
α(per °F) = α(per °C)/1.8

What this note covers

  • Linear expansion
  • Area (superficial) expansion
  • Volume (cubical) expansion
  • Relation between α, β and γ
  • Anomalous expansion of water
  • Thermal stress

Solved past-paper question (MHT-CET 2025)

Two rods of different materials have length l1 and l2 whose coefficients of linear expansion are alpha1 and alpha2 respectively. If the difference between the two lengths is independent of temperature, then

  1. (A) alpha1² l1 = alpha2² l2
  2. (B) l1/l2 = alpha2/alpha1
  3. (C) l1/l2 = alpha1/alpha2
  4. (D) l1² alpha2 = l2² alpha1

Solution

  1. The difference l₁ − l₂ does not change, so both rods must lengthen by the same amount.

    Δl₁ = Δl₂

  2. Use Δl = lαΔT for each rod. The temperature rise ΔT is the same.

    l₁α₁ΔT = l₂α₂ΔT

  3. Cancel ΔT.

    l₁α₁ = l₂α₂

  4. Rearrange for the ratio of lengths.

    l₁/l₂ = α₂/α₁

Answer: (B) l1/l2 = alpha2/alpha1

Common mistake: Writing α₁l₁ = α₂l₂ and then flipping it into l₁/l₂ = α₁/α₂.

The full note has 10 solved questions, 10 practice questions, figures and a topic test. Reading it on PrepKi is free after you log in.

PDF download is included in PrepKi plans. See plans.

More notes in Thermal Properties of Matter