Summary
A ferromagnetic specimen is placed in a solenoid and the current is changed slowly. The magnetic intensity H is set by the current and the flux density B in the specimen is measured. The graph of B against H is not a straight line, and when H is taken through a full cycle it does not retrace its path. It forms a closed loop.
Retentivity (residual magnetism) is the value of B (or M) that remains in the specimen when the magnetising field H is reduced to zero after saturation. It shows how strongly a material can retain magnetism.
Key formulas
- Energy lost per cycle per unit volume
- W = area of B–H loop (J/m³)
- Energy lost per cycle in core
- E = loop area × V
- Hysteresis power loss
- P = loop area × V × f
- Volume from mass
- V = mass/density
- Retentivity
- B (or M) remaining at H = 0
- Coercivity
- −H needed to make B = 0
What this note covers
- Hysteresis loop
- Retentivity and coercivity
- Choice of materials for permanent magnets and electromagnets
Solved past-paper question (MHT-CET 2025)
Magnetic hysteresis is exhibited by magnetic materials which are
- (A) only paramagnetic
- (B) only diamagnetic
- (C) only ferromagnetic
- (D) both para and ferromagnetic
Solution
Hysteresis needs the material to keep some magnetism when H is removed.
In a paramagnet or diamagnet the magnetisation vanishes when the field is removed, so B retraces its path.
In a ferromagnet the domains stay partly aligned, so B lags behind H and a loop is formed.
So hysteresis is shown only by ferromagnetic materials.
Answer: (C) only ferromagnetic
Common mistake: Choosing 'para and ferro'. Paramagnets are magnetised weakly and reversibly, so they show no loop.
The full note has 7 solved questions, 7 practice questions, figures and a topic test. Reading it on PrepKi is free after you log in.
PDF download is included in PrepKi plans. See plans.