Summary
A heat engine is a device that converts heat into work by taking a working substance through a cycle. In each cycle it absorbs heat Q₁ from a hot source at temperature T₁, converts part of it into work W, and rejects the remaining heat Q₂ to a cold sink at T₂. Over a complete cycle ΔU = 0, so W = Q₁ − Q₂.
Efficiency η is the fraction of the heat absorbed that is converted into work: η = W/Q₁ = 1 − Q₂/Q₁. It is always less than 1 (less than 100%), because some heat Q₂ must always be rejected. Power output is the work per cycle multiplied by the number of cycles per second.
Key formulas
- Work in a cycle
- W = Q₁ − Q₂
- Efficiency of any heat engine
- η = W/Q₁ = 1 − Q₂/Q₁
- Carnot efficiency (kelvin)
- η = 1 − T₂/T₁; Q₂/Q₁ = T₂/T₁
- Refrigerator COP
- α = Q₂/W = Q₂/(Q₁ − Q₂) = T₂/(T₁ − T₂)
- Heat pump COP
- Q₁/W = 1 + α = T₁/(T₁ − T₂)
- Link between α and η
- α = (1 − η)/η
- Heat given to hot body by refrigerator
- Q₁ = Q₂ + W
What this note covers
- Heat engine and efficiency
- Refrigerator and heat pump, coefficient of performance
- Carnot cycle and Carnot engine
Solved past-paper question (MHT-CET 2026)
A refrigerator has a coefficient of performance of 5. If the temperature inside the freezer is -20^°C, the temperature of the surroundings to which it rejects heat is:
- (A) 31^°C
- (B) 41^°C
- (C) 21^°C
- (D) 11^°C
Solution
The freezer is the cold space. Convert its temperature to kelvin.
T₂ = −20 + 273 = 253 K
For a Carnot refrigerator the COP depends only on the two temperatures.
α = T₂ / (T₁ − T₂) = 5
Solve for the temperature difference, then T₁.
T₁ − 253 = 253/5 = 50.6 ⇒ T₁ ≈ 303.6 K
Convert back to °C.
T₁ ≈ 30.6 °C ≈ 31 °C
Answer: (A) 31^°C
Common mistake: Using −20 °C directly instead of 253 K. The formula T₂/(T₁ − T₂) needs temperatures in kelvin.
The full note has 8 solved questions, 8 practice questions, figures and a topic test. Reading it on PrepKi is free after you log in.
PDF download is included in PrepKi plans. See plans.