Summary
A moving coil galvanometer detects and measures small currents. It works on the principle that a current-carrying coil in a magnetic field experiences a torque. A rectangular coil of N turns and area A is wound on a soft iron core between the concave pole pieces of a strong magnet. This arrangement makes the field radial, so the plane of the coil is always parallel to B and the torque is NIAB at every angle. That is why the scale is linear.
Key formulas
- Deflection of coil
- N I A B = C θ, θ = (N A B/C) I
- Current sensitivity
- θ/I = N A B / C
- Voltage sensitivity
- θ/V = N A B / (C G)
- Shunt for range I
- S = I_g G / (I − I_g)
- Shunt for n times range
- S = G / (n − 1)
- Resistance of ammeter
- R_A = G S/(G + S) = G/n
- Fraction through G
- I_g/I = S/(S + G)
- Series resistance for range V
- R = V/I_g − G
- Series resistance for n times range
- R = (n − 1) G
- Resistance of voltmeter
- R_V = G + R
What this note covers
- Moving coil galvanometer basics
- Galvanometer into ammeter (shunt)
- Galvanometer into voltmeter (series resistance)
Solved past-paper question (MHT-CET 2024)
A galvanometer of resistance G is shunted with a resistance of 10% of G. The fraction of total current flowing through the galvanometer is
- (A) I/11
- (B) 2I/11
- (C) I/10
- (D) I/5
Solution
The shunt is S = 0.1 G = G/10. Galvanometer and shunt have the same potential difference.
I_g G = I_s S
So the currents are in the inverse ratio of the resistances.
I_g / I_s = S/G = 1/10 → I_s = 10 I_g
The total current is the sum.
I = I_g + I_s = 11 I_g
The fraction through the galvanometer follows.
I_g = I/11
Answer: (A) I/11
Common mistake: Taking the fraction as 1/10 because the shunt is 10% of G. The galvanometer and shunt share the total current I.
The full note has 8 solved questions, 8 practice questions, figures and a topic test. Reading it on PrepKi is free after you log in.
PDF download is included in PrepKi plans. See plans.