Summary
A spherical lens or mirror does not bring all rays from a point to one point. Rays that pass through the outer part of the lens (marginal rays) are bent more than rays near the axis (paraxial rays). The marginal rays of a convex lens meet at a point nearer the lens. So a point object gives a blurred patch and not a sharp point. This defect is spherical aberration. The same happens with a spherical mirror.
The refractive index of a lens material is different for different colours; it is larger for violet than for red. So a lens has a shorter focal length for violet than for red. White light from a point is therefore focused at different…
Key formulas
- Chromatic aberration (longitudinal)
- f_red − f_violet = ω f
- Dispersive power
- ω = (n_v − n_r)/(n − 1)
- Achromatic doublet (in contact)
- ω₁/f₁ + ω₂/f₂ = 0
- Same material, separated by d
- d = (f₁ + f₂)/2
- Focal length and colour
- f_violet < f_red for a convex lens
What this note covers
- Spherical aberration
- Chromatic aberration
Solved past-paper question (MHT-CET 2024)
Rays of different colours fail to converge at a point after passing through a thick converging lens. This defect is called
- (A) spherical aberration
- (B) distortion
- (C) coma
- (D) chromatic aberration
Solution
The defect concerns rays of different colours failing to meet at one point.
Different colours have different refractive indices in the glass, so the lens has a different focal length for each colour.
f_violet < f_red
This defect is chromatic aberration.
Answer: (D) chromatic aberration
Common mistake: Choosing spherical aberration, because the lens is described as thick. The problem says rays of different colours, which points to dispersion.
The full note has 5 solved questions, 5 practice questions, figures and a topic test. Reading it on PrepKi is free after you log in.
PDF download is included in PrepKi plans. See plans.