Summary
Natural rubber is obtained as latex from the rubber tree. It is a polymer of isoprene (2-methylbuta-1,3-diene), with cis configuration at every C=C bond. So it is cis-1,4-polyisoprene. It is an elastomer: the chains are held by weak van der Waals forces and coil up, so rubber stretches and springs back.
Raw rubber is soft, sticky and weak, and it becomes tacky in heat and brittle in cold. Vulcanisation fixes this. Raw rubber is heated with sulphur (3 to 5 per cent) at about 373–415 K. Sulphur forms –S–S– cross-links between chains, at the sites of the double bonds. An accelerator such as zinc butyl xanthate makes the reaction faster.
Key formulas
- Natural rubber
- cis-1,4-polyisoprene; monomer CH₂=C(CH₃)–CH=CH₂
- Vulcanisation
- rubber + sulphur (3–5%), 373–415 K; –S–S– cross-links; accelerator zinc butyl xanthate
- Neoprene
- chloroprene, CH₂=C(Cl)–CH=CH₂ (vulcanised with MgO)
- Buna-S (SBR)
- 1,3-butadiene + styrene
- Buna-N (NBR)
- 1,3-butadiene + acrylonitrile
What this note covers
- Natural rubber and vulcanisation
- Synthetic rubbers: neoprene, Buna-S, Buna-N
Solved past-paper question (MHT-CET 2026)
Which of the following substances is used as accelerator for vulcanization of rubber?
- (A) Manganese dioxide
- (B) Zinc butyl xanthate
- (C) Hydrogen sulphide
- (D) Zinc acetate
Solution
In vulcanisation, rubber is heated with sulphur. The reaction is slow, so a catalyst called an accelerator is added.
The accelerator used is zinc butyl xanthate (or similar zinc compounds).
rubber + S —zinc butyl xanthate→ vulcanised rubber
Zinc acetate is a terylene catalyst, MnO₂ is not used, and H₂S is not an accelerator. So the answer is zinc butyl xanthate.
Answer: (B) Zinc butyl xanthate
Common mistake: Choosing zinc acetate (terylene catalyst) or MnO₂. The accelerator is zinc butyl xanthate.
The full note has 8 solved questions, 8 practice questions, figures and a topic test. Reading it on PrepKi is free after you log in.
PDF download is included in PrepKi plans. See plans.