Summary
The method depends on the physical state and the property that differs between the compound and its impurities. A pure compound has a sharp melting point or a fixed boiling point.
Chromatography separates components by their different adsorption on a stationary phase as a mobile phase flows past. The more strongly adsorbed component moves slower. In column chromatography the mobile phase is a liquid and the stationary phase is a solid adsorbent such as alumina or silica gel. In thin layer chromatography (TLC) a thin layer of silica gel on a glass plate is used. Paper chromatography is partition chromatography: water held in the paper fibres is the stationary phase. Colourless spots are located by UV light or iodine vapour.
Key formulas
- Rf
- distance moved by spot ÷ distance moved by solvent front
- P of N₂ (Dumas)
- P(total) − aqueous tension
- V₀ at STP
- P₁V₁ × 273 ÷ (760 × T₁)
- % N (Dumas)
- 28 × V₀ × 100 ÷ (22400 × m)
- % N (Kjeldahl)
- 1.4 × N × V ÷ m
- % C from CO₂
- 12 × m(CO₂) × 100 ÷ (44 × m)
- % H from H₂O
- 2 × m(H₂O) × 100 ÷ (18 × m)
- % Cl from AgCl
- 35.5 × m(AgCl) × 100 ÷ (143.5 × m)
- % S from BaSO₄
- 32 × m(BaSO₄) × 100 ÷ (233 × m)
What this note covers
- Methods of purification (crystallisation, sublimation, distillation, extraction, chromatography)
- Qualitative analysis: detection of elements (Lassaigne's test)
- Quantitative analysis: estimation of elements (Dumas, Kjeldahl, Carius)
Solved past-paper question (MHT-CET 2020)
Which of the following pairs of moving phase and stationary phase respectively is correct for column chromatography?
- (A) Liquid, Solid
- (B) Solid, Liquid
- (C) Gas, Liquid
- (D) Gas, Solid
Solution
In column chromatography the mixture is put on top of a column packed with an adsorbent, such as alumina or silica gel.
The adsorbent does not move, so it is the stationary phase, and it is a solid.
stationary = solid
A solvent (eluent) flows down the column and carries the components, so the moving phase is a liquid.
moving = liquid
So the pair is liquid (moving) and solid (stationary).
liquid, solid
Answer: (A) Liquid, Solid
Common mistake: Reversing the phases: in column chromatography the solid adsorbent stays and the liquid moves.
The full note has 8 solved questions, 8 practice questions, figures and a topic test. Reading it on PrepKi is free after you log in.
PDF download is included in PrepKi plans. See plans.