Summary
Common salt, NaCl, is the starting point for many sodium compounds. It is obtained from sea water by solar evaporation, or mined as rock salt. Electrolysis of brine gives chlorine, hydrogen and sodium hydroxide, and the Solvay process turns salt into sodium carbonate.
Plaster of Paris is CaSO₄·½H₂O, a white powder made by heating gypsum at 393 K: 2(CaSO₄·2H₂O) → 2(CaSO₄·½H₂O) + 3H₂O. When mixed with water it sets to a hard mass of gypsum, expanding slightly, so it fills moulds well. Dead burnt plaster (anhydrous CaSO₄, from heating above 473 K) does not set. Uses: plaster for fractured bones, statues and moulds, dentistry, blackboard chalk, and as a fire-proofing material.
Key formulas
- Brine electrolysis
- Cathode: H₂; anode: Cl₂; solution: NaOH
- Solvay
- NaCl + NH₃ + CO₂ + H₂O → NaHCO₃ + NH₄Cl
- Washing soda
- Na₂CO₃·10H₂O
- Baking powder
- NaHCO₃ + KHC₄H₄O₆ + starch
- Lime cycle
- CaCO₃ → CaO → Ca(OH)₂ → CaCO₃
- Plaster of Paris
- CaSO₄·½H₂O; gypsum CaSO₄·2H₂O
What this note covers
- Sodium chloride, sodium hydroxide and sodium carbonate
- Calcium oxide, calcium hydroxide and calcium carbonate
- Plaster of Paris and cement (uses)
Solved past-paper question (MHT-CET 2024)
Which of the following is released at cathode during electrolysis of aqueous sodium chloride?
- (A) Cl₂(g)
- (B) Na(s)
- (C) O₂(g)
- (D) H₂(g)
Solution
Brine has Na⁺, Cl⁻, H⁺ (from water) and OH⁻.
At the cathode, reduction takes place. Water is reduced more easily than Na⁺ because its E° is less negative.
2H₂O + 2e⁻ → H₂ + 2OH⁻
At the anode, chloride is oxidised to chlorine.
2Cl⁻ → Cl₂ + 2e⁻
So the gas at the cathode is H₂. Na⁺ and OH⁻ remain as NaOH.
Answer: (D) H₂(g)
Common mistake: Choosing Na or Cl₂. In aqueous brine, water is reduced at the cathode more easily than Na⁺.
The full note has 7 solved questions, 7 practice questions, figures and a topic test. Reading it on PrepKi is free after you log in.
PDF download is included in PrepKi plans. See plans.