Summary
Power is the rate of doing work, or the rate at which energy is transferred. Average power is P_av = W/t (total work over total time). Instantaneous power is P = dW/dt, the value at one instant. Power is a scalar, with SI unit watt (W = J s⁻¹).
For a flowing fluid, work the power from the energy that crosses per second: P = (dm/dt) × (energy per unit mass). Water falling through a height h has P = (dm/dt) g h. A jet of speed v, area A and density ρ carries kinetic energy at the rate P = ½ρAv³, since dm/dt = ρAv.
Key formulas
- Average power
- P_av = W/t = ΔE/t
- Instantaneous power
- P = dW/dt = F·v = Fv cos θ
- Rate of kinetic energy
- P = dK/dt = F_net · v
- Falling water
- P = (dm/dt) g h
- Jet of fluid
- P = ½ρAv³
- Efficiency
- η = P_out/P_in
- Constant power from rest
- v = √(2Pt/m); x ∝ t^(3/2)
- Units
- 1 hp = 746 W; 1 kWh = 3.6 × 10⁶ J; 1 eV = 1.6 × 10⁻¹⁹ J
What this note covers
- Average and instantaneous power
- Power as force times velocity
- Units of power and energy
Solved past-paper question (JEE 2022)
Water falls at a rate of 600 kg/s from a height of 60 m. How many bulbs of 100 W each will glow from the energy produced at the bottom of the fall? Assume full conversion of the energy of the falling water and all bulbs glowing at 100 W each. (Take g=10 m/s².)
- (A) 25
- (B) 50
- (C) 3600
- (D) 1000
Solution
Energy produced each second equals the loss of potential energy of 600 kg of water falling 60 m.
P = (dm/dt) g h = 600 × 10 × 60
Calculate.
P = 3,60,000 W = 3.6 × 10⁵ W
Each bulb takes 100 W.
Number of bulbs = 3,60,000/100 = 3600
Answer: (C) 3600
Common mistake: Using the energy of one second of water as 600 × 10 and forgetting the height 60 m.
The full note has 8 solved questions, 8 practice questions, figures and a topic test. Reading it on PrepKi is free after you log in.
PDF download is included in PrepKi plans. See plans.