Summary
When a battery E is connected to an inductor L in series with a resistance R, the induced emf −L di/dt opposes the rise of current. Kirchhoff's loop law gives E = iR + L di/dt, whose solution is i = I₀(1 − e^(−t/τ)) with I₀ = E/R and τ = L/R. The inductor voltage is V_L = E e^(−t/τ) and the resistor voltage is V_R = iR = E(1 − e^(−t/τ)). Here R is the total resistance of the loop, including the internal resistance of the battery and the coil.
Key formulas
- Growth of current
- i = I₀(1 − e^(−t/τ)), I₀ = E/R
- Decay of current
- i = I₀e^(−t/τ)
- Time constant
- τ = L/R
- Inductor voltage (growth)
- V_L = E − iR = E e^(−t/τ)
- Time to fraction f of I₀ (growth)
- t = −τ ln(1 − f); f = 0.5 gives 0.693 τ
- Stored energy
- U = ½Li², U_max = ½L(E/R)²
- Power balance
- Ei = i²R + d/dt(½Li²)
- Charge flowed in time τ
- q = EL/(eR²)
What this note covers
- Growth of current
- Decay of current
- Time constant
- Energy stored in the inductor
Solved past-paper question (JEE 2019)
A coil of self inductance 10 mH and resistance 0.1 Ω is connected through a switch to a battery of internal resistance 0.9 Ω. After the switch is closed, the time taken for the current to attain 80% of the saturation value is : [take \ln 5=1.6]
- (A) 0.016 s
- (B) 0.002 s
- (C) 0.103 s
- (D) 0.324 s
Solution
The loop resistance is the coil plus the battery's internal resistance.
R = 0.1 + 0.9 = 1.0 Ω
Time constant.
τ = L/R = 10 × 10⁻³/1.0 = 0.01 s
Growth: reaching 80% of the saturation value means 1 − e^(−t/τ) = 0.8.
e^(−t/τ) = 0.2 = 1/5
Take logarithms.
t = τ ln 5
Substitute ln 5 = 1.6.
t = 0.01 × 1.6 = 0.016 s
Answer: (A) 0.016 s
Common mistake: Using only the coil resistance 0.1 Ω in τ = L/R. The battery's internal resistance 0.9 Ω is also in the loop, so R = 1.0 Ω.
The full note has 6 solved questions, 6 practice questions, figures and a topic test. Reading it on PrepKi is free after you log in.
PDF download is included in PrepKi plans. See plans.