PrepKiYour AI companion for entrance exam preparation
JEE PHYSICS NOTES

Experiment: Vernier Calipers

JEE · Physics · Units and Measurement · Std XI

Summary

A vernier calliper measures length more finely than a ruler. The vernier scale is made so that n vernier scale divisions (VSD) equal (n − 1) main scale divisions (MSD). Then 1 VSD = (n − 1)/n MSD, and the least count (LC), the smallest length it can read, is LC = 1 MSD − 1 VSD = 1 MSD / n.

The reading is: main scale reading (MSR, the last main scale mark left of the vernier zero) + VC × LC, where VC is the number of the vernier division that coincides with a main scale division. A different arrangement, n VSD = m MSD, gives LC = (1 − m/n) MSD in the same way.

Key formulas

Vernier least count (n VSD = (n − 1) MSD)
LC = 1 MSD − 1 VSD = 1 MSD / n
Reading
MSR + VC × LC
Positive zero error
ZE = + VC × LC
Negative zero error
ZE = −(n − VC) × LC
Corrected reading
observed reading − ZE
Screw gauge least count
LC = pitch / number of circular divisions
Volume of a cylinder
V = π d² L / 4, ΔV/V = 2Δd/d + ΔL/L
Volume of a sphere
V = π d³ / 6, ΔV/V = 3Δd/d

What this note covers

  • Least count and zero error
  • Measuring a length, diameter or depth
  • Volume of a cylinder or sphere
  • Error analysis

Solved past-paper question (JEE 2026)

In a Vernier calipers, when both jaws touch each other, zero of the Vernier scale is shifted to the right of zero of the main scale and 7th Vernier division coincides with a main scale reading. If the value of 1 main scale division is 1 mm and there are 10 Vernier scale divisions, then the Vernier caliper has

  1. (A) 0.07 cm negative zero error
  2. (B) 0.7 cm negative zero error
  3. (C) 0.07 cm positive zero error
  4. (D) 0.7 cm positive zero error

Solution

  1. One main scale division is 1 mm and there are 10 vernier divisions, so the least count is the main scale division divided by 10.

    LC = 1 mm / 10 = 0.1 mm = 0.01 cm

  2. The jaws touch and the vernier zero is to the right of the main zero. So the zero error is positive.

  3. The 7th vernier division coincides.

    ZE = + 7 × 0.01 cm = + 0.07 cm

  4. So the calliper has a positive zero error of 0.07 cm.

Answer: (C) 0.07 cm positive zero error

Common mistake: Quoting 0.7 cm (using 7 mm) instead of 7 × LC = 7 × 0.01 cm = 0.07 cm.

The full note has 8 solved questions, 8 practice questions, figures and a topic test. Reading it on PrepKi is free after you log in.

PDF download is included in PrepKi plans. See plans.

More notes in Units and Measurement