Summary
Surface tension makes a curved liquid surface behave like a stretched skin. The pressure on the concave (inner) side is larger than on the convex side. This difference is the excess pressure. For a liquid drop of radius R it is ΔP = 2T/R. To see why, let the drop grow by dR. Work done by the excess pressure is ΔP × 4πR² dR. The surface energy gained is T × 8πR dR. Equate them.
A soap bubble in air is a thin film with two surfaces, both nearly of radius R. The excess pressure inside it is 4T/R. An air bubble inside a liquid has only one surface, so its excess pressure is 2T/R. The air inside a bubble…
Key formulas
- Excess pressure, soap bubble in air
- P_in − P₀ = 4T/R
- Excess pressure, air bubble in liquid
- P_in − P_liquid = 2T/R
- Surface area of bubble
- 2 × 4πR² (two surfaces)
- Work to blow bubble from R₁ to R₂
- W = T × 2 × 4π(R₂² − R₁²) = 8πT(R₂² − R₁²)
- Moles of air inside
- n = P_in V/(RT), V = 4πR³/3
- Ratio of volumes at excess pressures ΔP₁ and ΔP₂
- V₁/V₂ = (ΔP₂/ΔP₁)³
- Radius of the big drop
- R = n^(1/3) r
- Energy released on merging
- ΔE = 4πT (n r² − R²) = 4πT r² (n − n^(2/3))
- Energy needed to split one drop into n
- ΔE = 4πT R² (n^(1/3) − 1)
- Surface energy ratio, final : initial
- n^(−1/3)
What this note covers
- Excess pressure in drops and bubbles
- Soap bubble in air and in liquid
- Merging and splitting of drops
- Two bubbles in contact
Solved past-paper question (JEE 2023)
An incompressible liquid is kept in a container having a weightless piston with a hole. A capillary tube of inner radius 0.1 mm is dipped vertically into the liquid through the airtight piston hole (the top of the capillary is open to the atmosphere). The air in the container is isothermally compressed from its original volume V₀ to (100/101)V₀ with the movable piston. Considering air as an ideal gas, the height (h) of the liquid column in the capillary above the liquid level in cm is ____. [Given: surface tension of the liquid is 0.075 N m⁻¹, atmospheric pressure is 10⁵ N m⁻², g=10 m s⁻², density of the liquid is 10³ kg m⁻³ and contact angle of the capillary surface with the liquid is zero]
Solution
Compressing the air isothermally to 100/101 of its volume raises its pressure (Boyle's law).
P₁ = P₀ V₀/V = 1.01 × 10⁵ Pa
Extra pressure on the liquid in the container = 1000 Pa
The capillary top is open to the atmosphere. The meniscus is concave (zero contact angle), so the pressure just below it is lower than P₀ by 2T/r.
2T/r = 2 × 0.075/(10⁻⁴) = 1500 Pa
Pressure below meniscus = P₀ − 1500
The liquid surface in the container is at pressure P₁. Equal pressures at the same level inside and outside the capillary:
P₁ = (P₀ − 1500) + hρg
Solve for h.
hρg = 1000 + 1500 = 2500 Pa → h = 2500/(10³ × 10) = 0.25 m
So the height of the liquid column is 25 cm.
Answer: 25
Common mistake: Subtracting the 1000 Pa and 1500 Pa instead of adding them. The liquid in the capillary is pushed up by both the extra air pressure and the concave meniscus. Numerical answer in cm.
The full note has 8 solved questions, 8 practice questions, figures and a topic test. Reading it on PrepKi is free after you log in.
PDF download is included in PrepKi plans. See plans.