Summary
To charge a capacitor, the source must push charge against the potential already built up. When charge q is on the plates, moving a further dq costs dW = (q/C) dq. Adding these up from 0 to Q gives the energy stored in the electric field between the plates.
The energy of a capacitor sits in the field, not on the plates. Energy per unit volume of the field is u = ½ε₀E² in air and u = ½Kε₀E² in a dielectric. For a plate capacitor, U = ½ε₀E² × (A d), which agrees with ½CV².
Key formulas
- Stored energy
- U = ½CV² = Q²/2C = ½QV
- Use ½CV² when
- the capacitor stays on the battery (V fixed)
- Use Q²/2C when
- the capacitor is isolated (Q fixed)
- Common potential (like plates joined)
- V = (C₁V₁ + C₂V₂)/(C₁ + C₂)
- Common potential (opposite plates joined)
- V = (C₁V₁ − C₂V₂)/(C₁ + C₂)
- Energy lost, like plates
- ΔU = ½ · C₁C₂/(C₁ + C₂) · (V₁ − V₂)²
- Energy lost, opposite plates
- ΔU = ½ · C₁C₂/(C₁ + C₂) · (V₁ + V₂)²
- Force, in terms of charge
- F = Q²/(2ε₀A)
- Force, in terms of field
- F = ½ε₀AE² = ½QE
- Force, in terms of voltage
- F = ε₀AV²/(2d²) = CV²/2d
What this note covers
- Energy stored in a capacitor
- Energy density
- Sharing of charge and loss of energy
- Van de Graaff generator
- Work done by a battery and heat produced
- Force between capacitor plates
Solved past-paper question (JEE 2025)
A parallel-plate capacitor of capacitance 40 μF is connected to a 100 V power supply. Now the intermediate space between the plates is filled with a dielectric material of dielectric constant K=2. Due to the introduction of dielectric material, the extra charge and the change in the electrostatic energy in the capacitor, respectively, are -
- (A) 2 mC and 0.2 J
- (B) 8 mC and 2.0 J
- (C) 4 mC and 0.2 J
- (D) 2 mC and 0.4 J
Solution
The capacitor stays connected to the 100 V supply, so the potential difference remains 100 V while the dielectric goes in.
Initial charge:
Q₀ = CV = 40 µF × 100 V = 4 mC
With the dielectric the capacitance becomes KC = 80 µF, so the new charge is 8 mC. The extra charge supplied by the battery is the difference.
Q = 80 µF × 100 V = 8 mC
extra charge = 8 − 4 = 4 mC
Energy change, using U = ½CV²:
ΔU = ½ (80 − 40) × 10⁻⁶ × (100)² = ½ × 40 × 10⁻⁶ × 10⁴ = 0.2 J
So the extra charge is 4 mC and the energy increases by 0.2 J.
Answer: (C) 4 mC and 0.2 J
Common mistake: Treating the charge as unchanged: the battery stays on, so V is fixed and the charge grows by the factor K.
The full note has 9 solved questions, 9 practice questions, figures and a topic test. Reading it on PrepKi is free after you log in.
PDF download is included in PrepKi plans. See plans.